indicators tripple flash

[Rusky]

Can indicators be set to tripple flash on a2004 e85? If so anyone managed it with carly? Also can it be coded for the doors to unlock when the ignition is turned off? If so again can it be done using carly and how?
Ta

 

[mjennings23]

Nope, facelift only!

 

[Zoomer]

Facelift version only I am told

 

[srhutch]

Or with an Intravee (Don't think it makes a difference pre/post faclift)

 

[GuidoK]

xcarstyle light module can also do triple flash (amongst other things)

 

[Rusky]

Cheers guys

 

[mac27040]

I have it on an 2004 but via intravee

 

[Ducklakeview]

I'm currently trying to design a little module that will provide this in our pre facelift cars....

Mike

 

[thanatu55]

You can do allsorts with these:

http://www.car-solution.de/en/shop/bmw-z4-e85

 

[-banned-]

You can update lcz module to the latest version by using WinKFP, that will give you tipple flash option. Takes good 30min to write it so better have battery charger connected.

 

[samZ4M]

I have an intravee, but can't see where to set it. There is one place (I forget the name) and it goes up to 11, but it still doesn't flash more than once. '56 plate car...

Can someone tell me what I need to do?

 

[DaveZ4richardson]

You can do allsorts with these:

http://www.car-solution.de/en/shop/bmw-z4-e85

Like the look of this module, anyone got it installed?

 

[thanatu55]

You can do allsorts with these:

http://www.car-solution.de/en/shop/bmw-z4-e85

Like the look of this module, anyone got it installed?

Yep, I have the eLight ultimate module fitted. Mainly for the lights when locking and unlocking. You can basically program any sequence you like, create a whole light show demo if you want to. It's pretty simple too.

[youtube]3qAt285DBng[/youtube]

 

[thanatu55]

You can program it on you PC, some of the features unlock when you plug in the module (I don't have it plugged in in this screenshot), although features are dependant upon model/vehicle:

 

[mac27040]

I have an intravee, but can't see where to set it. There is one place (I forget the name) and it goes up to 11, but it still doesn't flash more than once. '56 plate car...

Can someone tell me what I need to do?

What firmware version have you got, you have to accept the disclaimer, then in extras you need to select you car model then in light section you can find the triple flash option

 

[samZ4M]

I have an intravee, but can't see where to set it. There is one place (I forget the name) and it goes up to 11, but it still doesn't flash more than once. '56 plate car...

Can someone tell me what I need to do?

What firmware version have you got, you have to accept the disclaimer, then in extras you need to select you car model then in light section you can find the triple flash option

I'll check, but I do have the triple flash, it just doesn't do anything. Let me try again...

 

[Ducklakeview]

You can update lcz module to the latest version by using WinKFP, that will give you tipple flash option. Takes good 30min to write it so better have battery charger connected.

Interesting, any details?

Mike