JimmyPop said:
You're also likely to gett error messages and ambiguous erros usign scotlocks as opposed to a proper solder joint.
Good job oyu receonnected the airbag or you'd be in for a recode not just a 15 minute tea break
How to retrofit M Steering Wheel with Multi Function Control
- Thread starter sideshowbob
- Start date
You're also likely to gett error messages and ambiguous erros usign scotlocks as opposed to a proper solder joint.
Good job oyu receonnected the airbag or you'd be in for a recode not just a 15 minute tea break
spikeyblonde
Member
Finally finished installing a cracking install of a new M MFSW obtained from sopers - managed to snag the last one at £312 delivered - aparently they are now £500+!!!! got lucky i suppose (although the coloured threading ones have come down to around £600 from 1K!!!). I bought playlistics m sports from buy and sell but changed my mind for the multifunction. so £150 to anyone that wants an m sport wheel!! 
) Looks amazing however a definate mod for any enthusiast!! stubby gear knob next for me i think if anyone want some hints on airbag removal or wheel changing feel free to pm me - i went through all the normal pain, but took pictures as i went
) Looks amazing however a definate mod for any enthusiast!! stubby gear knob next for me i think if anyone want some hints on airbag removal or wheel changing feel free to pm me - i went through all the normal pain, but took pictures as i went spikeyblonde
Member
I got it from Sopers. They advised this was the last one they had in stock at that price as they bought it in before the price rises - he did say he was going to contact bmw to see why they can justify a random £200 rise for the same product. I you want one without the controls let me know nd you can have my "spare" for £150
Hosse said:
How about an introduction and include age of car, etc.
Read the various write ups and you'll discover if your should have the loom in place, needs wiring and then my 'how to' on wiring paddles to a pre facelift auto.
Sorry..
Mounted it in 15 minutes. Looks awsome, but non of the buttons work.
Its an 2003 model, 3.0IA. Steeringwheel on the left. Prodused in november 2002.
I asume that I need:
- the slidingplate with all the pins 61-31-8-379-091
- one set of PC reset cabels
- these ekstra 2 cabels for the multifunctions buttons 61120394848
Here is how it looks: http://i1218.photobucket.com/albums/dd407/Hossr/335458b7.jpg
I orderd the parts on friday, so ill have them tomorrow monday. Hope its the right ones for my Z4.
Mounted it in 15 minutes. Looks awsome, but non of the buttons work.
Its an 2003 model, 3.0IA. Steeringwheel on the left. Prodused in november 2002.
I asume that I need:
- the slidingplate with all the pins 61-31-8-379-091
- one set of PC reset cabels
- these ekstra 2 cabels for the multifunctions buttons 61120394848
Here is how it looks: http://i1218.photobucket.com/albums/dd407/Hossr/335458b7.jpg
I orderd the parts on friday, so ill have them tomorrow monday. Hope its the right ones for my Z4.
Hosse said:
I think I paid around £55 a couple of years ago
Hosse said:
Well done - glad you got it sorted. Love the paddle shift and completed probably 300 miles in the Lakes this weekend and drove every mile with paddles (except when in slow traffic lines)
Hey guys, I just used this thread as a guide to fit my multifunction retrofit kit to my standard wheel. Went without a hitch!
For the record, retrofit kit 65 71 0 304 942 included the upgrade cable and scotchlok connectors, and this was required for my Oz spec September 03 Zed. By far the cheapest place I found to buy the kit was thebmwpartstore.com/ and they were a real pleasure to deal with! Note that the kit I bought (and above part number) are the standard "graphite" colour. "Chrome line" colour is a different part number, and from what I've seen quite a bit more expensive.
I used the instructions here for the airbag removal and to help with the upgrade cable installation, but for the main part of the retrofit I followed the BMW PDF posted here. If you can't access that file PM me your email address and I can send it to you
Overall I'm very happy with the result - particularly because I installed a bluetooth/voice recognition ULF at the same time (more to come on that later)!
For the record, retrofit kit 65 71 0 304 942 included the upgrade cable and scotchlok connectors, and this was required for my Oz spec September 03 Zed. By far the cheapest place I found to buy the kit was thebmwpartstore.com/ and they were a real pleasure to deal with! Note that the kit I bought (and above part number) are the standard "graphite" colour. "Chrome line" colour is a different part number, and from what I've seen quite a bit more expensive.
I used the instructions here for the airbag removal and to help with the upgrade cable installation, but for the main part of the retrofit I followed the BMW PDF posted here. If you can't access that file PM me your email address and I can send it to you
Overall I'm very happy with the result - particularly because I installed a bluetooth/voice recognition ULF at the same time (more to come on that later)!
nicollow said:Thanks with all the info here. My new steering wheel arrived yesterday and I couldnt wait to fit it. Ended up doing it in the dark, in the office car park with my mobile as the only source of light. Went without a hitch though, and now works a treat!!
great work nicollow
told you if everything is there, is easy navid.v said:nicollow said:Thanks with all the info here. My new steering wheel arrived yesterday and I couldnt wait to fit it. Ended up doing it in the dark, in the office car park with my mobile as the only source of light. Went without a hitch though, and now works a treat!!
great work nicollow
Yeah, thanks for pointing me to it. Must admit, when I had the dash apart, the light on my phone in my mouth and the soldering iron (a butane gas one!!) on, I thought that it was going to go tits up big time. But yeah, no stress. Have to say, working on BMWs is a bloody joy compared to anything else Ive ever had. Everything is so well thought out and well made it makes is a hell of a lot easier. Defo a Bimma convert
Now if only I can convince my old man to get rid of his crappy Audi S5 in favour of the new BMW M5 Id be a happy boy :lol:I will have the standard M sport steering wheel but with out the buttons, does anyone know what the part number is for the kit i would need ?
I would want the spoke in black as well. its for a 3.0si sport coupe
Many thanks ! ive spent the last hour looking for the number ........
I would want the spoke in black as well. its for a 3.0si sport coupe
Many thanks ! ive spent the last hour looking for the number ........