Replace brake fluid warning light comes on every 2 years,
Just done this on my 06 3.0si with success.
For vehicles that can have the service light reset using the instrument cluster.
1. Ignition key to position 0 (off)
2. Hold trip meter button (the left button)
3. Ignition key to position 1. The display will show: "test 1"
4. Keep holding the trip meter button until the the display shows: "reset inspection" or "reset oil service"
5. Release the button
6. Press and release the trip meter button once. The display will show the square clock symbol and the month the fluid change is/was due on.
7. Press and hold the trip meter button until the display is showing a flashing "reset". Then release the button. "Reset" will keep flashing.
8. Press and release the trip meter button once. The display will show the square clock symbol and the month for the next fluid change in 2 years time.
9. Press and hold the trip meter until "End" is displayed
10. Let go of the button and turn ignition to 0 (off). The clock symbol will not show again until the next fluid change is due.
If your service light needs to be reset using a reset tool/scanner then you will need to reset the brake fluid light also with this.
Just done this on my 06 3.0si with success.
For vehicles that can have the service light reset using the instrument cluster.
1. Ignition key to position 0 (off)
2. Hold trip meter button (the left button)
3. Ignition key to position 1. The display will show: "test 1"
4. Keep holding the trip meter button until the the display shows: "reset inspection" or "reset oil service"
5. Release the button
6. Press and release the trip meter button once. The display will show the square clock symbol and the month the fluid change is/was due on.
7. Press and hold the trip meter button until the display is showing a flashing "reset". Then release the button. "Reset" will keep flashing.
8. Press and release the trip meter button once. The display will show the square clock symbol and the month for the next fluid change in 2 years time.
9. Press and hold the trip meter until "End" is displayed
10. Let go of the button and turn ignition to 0 (off). The clock symbol will not show again until the next fluid change is due.
If your service light needs to be reset using a reset tool/scanner then you will need to reset the brake fluid light also with this.