how to remove door trim

[marioz4]

dos anyone knows how to remove the interior door trim, in this case wooden trim with door handle. Thx

 

[flybobbie]

https://www.youtube.com/watch?v=TJ3FkjeL9TE
Had the door panel off a few times, but can't remember how that trim is fastened on.
2:34 looks like screws on the back of the door card.

 

[Nictrix]

Yip, its screwed on from the back.
You don't have to undo any of the electrics to remove it if you can get the door card balanced on something after popping it off the door.

 

[marioz4]

Yip, its screwed on from the back.
You don't have to undo any of the electrics to remove it if you can get the door card balanced on something after popping it off the door.

Thanks - so by taking the screw of the back the trim will come out, so i dont need to take whole door panel out?

 

[Anonymous]

Yip, its screwed on from the back.
You don't have to undo any of the electrics to remove it if you can get the door card balanced on something after popping it off the door.

I think what he meant was once you have removed the door card from the door you keep it propped / tied up so you don’t have to disconnect the myriad of wires you’ll find behind it..

Thanks - so by taking the screw of the back the trim will come out, so i dont need to take whole door panel out?

 

[Nictrix]

Yip, its screwed on from the back.
You don't have to undo any of the electrics to remove it if you can get the door card balanced on something after popping it off the door.

I think what he meant was once you have removed the door card from the door you keep it propped / tied up so you don’t have to disconnect the myriad of wires you’ll find behind it..

Thanks - so by taking the screw of the back the trim will come out, so i dont need to take whole door panel out?

Exactly as PBondar says. Once the door card is off the door there is enough room to unscrew the trim without having to disconnect any wiring. The only thing that needs disconnecting is the cable for the door release.