How to identify Style 108 wheel width?

[NW1]

The front wheels are 8" wide (OEM tire is 225 mm wide) and the rear wheel are 8.5" wide (OEM tire is 255 mm wide). I plan on having new tires installed soon. Other than using a giant wheel caliper, (which I don't have) is there any way to visually distinguish which wheel is which? (number, symbol, hieroglyphics, etc. on the outboard side). I want to confirm the shop installs the correct tires on the correct wheels and the correct wheels on the correct axles.

I am away from my car at the moment otherwise, I'd investigate myself and spare you all from my boring minutiae.

Thanks!

 

[j3nks79]

It will be stamped on inside. 8J and 8.5J

 

[NW1]

It will be stamped on inside. 8J and 8.5J

Thanks!

 

[j3nks79]

It will be stamped on inside. 8J and 8.5J

Thanks!

To be honest any garage or tyre place will be quite used to this and shouldn’t be a problem

 

[NW1]

It will be stamped on inside. 8J and 8.5J

Thanks!

To be honest any garage or tyre place will be quite used to this and shouldn’t be a problem

Agreed but Murphy's law is around every corner.

 

[Zedebee]

Put a felt tip / sharpie mark on the rears before you take it in, then it’s an easy visual check on the way out.

 

[NW1]

Put a felt tip / sharpie mark on the rears before you take it in, then it’s an easy visual check on the way out.