Help me out peeps

[Rusky]

Ok first of all my DIY skills are minimal but even i should be able to do this:

changing my none xenon bulbs (side, dipped and Main)

So i removed the flap in the wheel arch
I pulled down the metal clip
Loosened of the black plastic case to the headlamps
removed said back plastic case :thumbsdown: :thumbsdown: It feels like its stuck and i dont want to break it so is there a lot of wiggling about to get it out??? it just flops around but doesn't come out

any advice very much appreciated

ta :roll: :roll:

 

[Chris_D]

jack up the car. wheel off. you'll have more access and room to wiggle the cover free.
might need a new seal by the sounds of it. half left on the headlight, half left on the cover.

 

[Rusky]

No the seal was ok it just felt like something solid was stopping it from coming out :roll:

 

[sw4nny]

No the seal was ok it just felt like something solid was stopping it from coming out :roll:

Keep wiggling gently and at strange angles it will come out ,ensuring the clip is totally free from the cover

 

[Rusky]

cool thought that would be it, just wanted to make sure i wasn't missing something.

 

[Steve84N]

There's a plastic lug on the inner side of the cover, it's a right pain to get back in. The headlight adjuster also gets in the way of pulling the cover out.