Headsup M Sport seats + Interior
- Thread starter Redzedfour
- Start date
at the seller in such case
Fitted m sport seats and door cards, bought passenger occupancy sensor bypass off eBay £10 and coded car to switch off passenger seat belt warning.
Coding is via SSS v32 retro fit section but you must install change.iso to vm ware setup, this causes the voltage to be higher than 12.4 when coding it needs to be greater than 13 volts.
So cheap way of fitting facelift seats to a preface lift model.
Coding is via SSS v32 retro fit section but you must install change.iso to vm ware setup, this causes the voltage to be higher than 12.4 when coding it needs to be greater than 13 volts.
So cheap way of fitting facelift seats to a preface lift model.
Look good although not convinced the colour is Champagne Nappa. More like Needs To Be Revived Cream.
Is there any way of tightening the leather in the doorcard sections. One thing Ive noticed on other Zeds is that sometimes with lighter coloured leather it all looks very saggy.
Is there any way of tightening the leather in the doorcard sections. One thing Ive noticed on other Zeds is that sometimes with lighter coloured leather it all looks very saggy.
