Headlight Out, Ballast and Bulb are ok?

L

logixhunter

New member
She's a 2007 BMW z4 3.0i

Took her to the BMW stealership and they wanted to charge me 450 for a new D2S Xenon bulb. Instead I got my own and replaced my bulb on the drivers side. However it didn't work. Thinking I messed up I put the bulb in the passenger side. And it worked, and the bulb that was in the passenger side into the drivers side. And it didnt work. AHA! it must be the BALLAST!!! .........NOPE. Switched the ballasts around so the driver side ballast was on the passenger side, bulb bulb still worked.

To make things clear. Ballast A and Bulb A are in the drivers side and dont work, But when Ballast A and Bulb A are in the passenger side they work.

Whats wrong? and how do i fix it????!!!!! One more ticket and I lose my license >< :headbang:

Thanks <3
 
just to clear things up, when you say the ballast or did you change the ignitors on the back of the bulb?
 
The square module that you rotate about 10 degrees to the left to open and pull back revealing the xenon bulbs black backing. is what i reffered to as the ballast.
 
logixhunter said:
The square module that you rotate about 10 degrees to the left to open and pull back revealing the xenon bulbs black backing. is what i reffered to as the ballast.
Click to expand...

This is not the ballast, it is the igniter.

The chances are the ballast has failed which is the under side of headlight (bumper off) there prone for water getting into them

http://www.bimmerfest.com/forums/showthread.php?t=719294
 
You must log in or register to reply here.
Back
Top Bottom