FS- Set of 4 style 224 Z4M wheels

D

dannyg_m3

Member
Hi All,

These have come of a lovely 24k mile Z4MC. All straight and true with good tyres. In terms of condition, the near side wheels have some minor curbing, and the off side have virtually no curbing, but a bit of laqure / paint peal. Nothing major, and they still look fine without refurbishing...

Tyres- Fronts are OEM spec conti's with approx 3-4mm of tread, rears are Kuhmo Ecsta LE Sport's with approx 5-6mm on them.









£550 ONO

Based near Leicester, collection / delivery negotiable.

Ta,
Dan
 
E86 Z4 M Coupe wheels style 224
Front is 8x18 with 42mm offset P/N 36 10 7 836 832
Rear is 9x18 with 30mm offset P/N 36 10 7 836 833
 
Can you PM me please a contact number, as Ive sent you info but don't know if message has been sent as its in outbox?
Luke
 
Am I right in thinking these tyres will make the wheels to big to put straight onto a E85 3.0?

Why are wheels for sale never anywhere near Bedfordshire, always too far to go and have a look :(
 
Danderton said:
Am I right in thinking these tyres will make the wheels to big to put straight onto a E85 3.0?

Why are wheels for sale never anywhere near Bedfordshire, always too far to go and have a look :(
Click to expand...

They will push the wheels out slightly as the ///M has a narrower track. Several have fitted them without issue, just closer to the limit
 
Danderton said:
Am I right in thinking these tyres will make the wheels to big to put straight onto a E85 3.0?

Why are wheels for sale never anywhere near Bedfordshire, always too far to go and have a look :(
Click to expand...

i think they look great, here they are on my 3.0si
224z4.jpg
 
The M tyre profiles are different to the non-M IIRC ? Are they not 40 rear and 45 front as opposed to 35 and 40 on the non-M ? Probably fine if your Z is not lowered, but I'm no expert as I don't have mine yet :D
 
Bing said:
The M tyre profiles are different to the non-M IIRC ? Are they not 40 rear and 45 front as opposed to 35 and 40 on the non-M ? Probably fine if your Z is not lowered, but I'm no expert as I don't have mine yet :D
Click to expand...

You are correct Sir.

Suppose I had better start polishing them for you :D
 
Pleasure doing business with dan, ill put some pics up of them on the car tomorrow if it doesn't chuck it down.

Danderton I saw these and said yes even before I knew where I had to drive to get them can't beat a bit of impulse shopping

Left a 2am this morning meet up with dan at 4, got back at 6 and went to work
 
Blimey that's dedication! No worries I was dithering anyway, hoping a decent set comes up nearer me at some point

Get some pics up when they're fitted!
 
Danderton said:
Image didn't work mate, be good to see them on a non m
Click to expand...

As mentioned above, the rears sit flush with the bodywork. Had them fitted for a couple of years with no rubbing or MOT failures

ruzydure.jpg



Sent from my iPhone using Tapatalk - now Free
 
You must log in or register to reply here.
Back
Top Bottom