FS: OEM Z4M Coupe Wheels w/ Tires! Excellent!

Z

z4maudioman

Member
 Bay Area, CA
Hey Everyone,

I recently purchased a set of ZCP wheels for my coupe and no longer need the stock Z4M wheels that came with my car, so they are up for sale!

They are in EXCELLENT condition. I bought the car in Nov and have less than 5000 miles on the wheels and tires, so there is plenty of thread left on the Conti Sport 2's. Here are some specs on the wheels:

Front: 18x8 +42 w/ 225/45/18
Rear: 18x9 +30 w/ 255/40/18

I have checked the wheels throughly and the only thing I could find was a tiny nick on one of the wheels right near the valve stem. Extremely small and there was no way I could get it to photograph. It wouldn't show up. The wheels really are in excellent condition, as they should be considering they were only on the car for a little over 2 months.

I am looking for $1300 plus shipping for these wheels and tires. Please PM me with any questions. Thanks!

attachment.jpg
attachment.jpg
 
They do not have the sensors in them. I am using the sensors in my new wheels.

Make me an offer when you are ready! :)
 
you don't have the take the tire off to put the sensors in do you? Just deflat and break the bead? Or will it cost me 20 bucks a tire to have the tire place do it?

(i am still working on the wife she likes the m6 copies better and i am trying to tell her those are fake these are REAL!) If you still have them when i get my tax return we might could work something. What does shipping look like to SA Texas 78245.
 
Are they run flats??? and will they fit my 2.5 sport without looking weird? or is to offset too much?
 
it's non runflat and it will fit your 2.5 without a problem. It might stick out a little but if i remember from seeing pictures before, it sits flush with the rear fender.

i have yet to install mine. Soon though Soon....
 
BlackSapphireZ said:
it's non runflat and it will fit your 2.5 without a problem. It might stick out a little but if i remember from seeing pictures before, it sits flush with the rear fender...
Click to expand...

If these are the standard Z4M fitment with 18 x 9 ET 30 in the rear vs. 18 x 8.5 ET 50 for the non-M, won't they stick out from the rear fenders of a non-M Z4 by a good inch further than stock on each side??
 
The sizes are as follows:

Front: 18x8 +42 w/ 225/45/18
Rear: 18x9 +30 w/ 255/40/18

From my understanding, they will fit and stick out slightly. However, you could do it from what i've heard...

Please check fitment on your own before purchasing. Thanks!
 
Wow those are NICE. Can I post my kidney for sale in this thread? Proceeds will go to buying the wheels and tires. :)
 
You must log in or register to reply here.
Back
Top Bottom