FS: my demod list... updated 18/01
- Thread starter aquazi
- Start date
:lol: :lol: Just caught up with this thread.. had me in stitches!
Sadly due to work sending me all over the place while i am still working for them and the next 3 Saturdays with xmas parties looks like i will get little if any time this month to pull bits off.
But at the moment i dont plan to sell these as if i get an E89 i will probably put them on that as i still quite like them
Yep intravee will go.. on the top of my head other bits i have are:
illuminated door sill
ZHP
original 108's with RFT's after BMW replaced them due to corrosion - not seen these in 4 years though as have been in my parents garage so no idea how much junk is covering them now!
Winter 108's
And my M front and rear (+ quad).. both will need a repray.. but i have had a couple of pm's about the rear already.
Sadly due to work sending me all over the place while i am still working for them and the next 3 Saturdays with xmas parties looks like i will get little if any time this month to pull bits off.
I have vreds on my VMR, the rears changed 5K miles ago the front must have 15K on them now.. but have about 4-5mm left same as my rears :lol:JonnyB said:
But at the moment i dont plan to sell these as if i get an E89 i will probably put them on that as i still quite like them
srhutch said:
Yep intravee will go.. on the top of my head other bits i have are:
illuminated door sill
ZHP
original 108's with RFT's after BMW replaced them due to corrosion - not seen these in 4 years though as have been in my parents garage so no idea how much junk is covering them now!
Winter 108's
And my M front and rear (+ quad).. both will need a repray.. but i have had a couple of pm's about the rear already.
Ok updated the first post.. and here are the pics of the front bumper - got it off just now and needs a good clean - but will require a respray/ fix see below:
Comes with everything you need to fit it to a non M (with washer jets!) if you dont have headlight washers/ non 3.0 then you will need to get caps for the holes and stick them down.
Bumper and grill - you'll have to use your existing kidney grills:
There is a crack in the lower left hand fang:
Front
Back:
The brake ducts and brackets:
The left hand side has lots the little plastic clips at the top - i used a screw through the bracket to secure it (caused by the same thing which cracked the fang!) to be honest many on here havent even used the brackets!
An M undertray - has some damage - probably the curb/ stone... but does the job still - and saves you making the standard undertray fit the M bumper:
Comes with everything you need to fit it to a non M (with washer jets!) if you dont have headlight washers/ non 3.0 then you will need to get caps for the holes and stick them down.
Bumper and grill - you'll have to use your existing kidney grills:
There is a crack in the lower left hand fang:
Front
Back:
The brake ducts and brackets:
The left hand side has lots the little plastic clips at the top - i used a screw through the bracket to secure it (caused by the same thing which cracked the fang!) to be honest many on here havent even used the brackets!
An M undertray - has some damage - probably the curb/ stone... but does the job still - and saves you making the standard undertray fit the M bumper:
Bad_Pritt said:What colour are the bumpers?
Good point!
Black sapphire... But both need a respray to be 100%
csm180 said:
Sadly looks like i'm going to take the hit and px it at £7k... Which is ludicrous for 2008 car with under 49k miles... But its just more convenient
Sent from my iPhone 5s using Tapatalk
A
Anonymous
Guest
aquazi said:
Hi chap, does the rear bumper have OEM PDC fitted? And is it in good condition bar the paint work, i.e. will be 100% with a respray?
Many thanks, James.
JAD said:
Yep has oem parking sensors and holders.
The bumper has lacquer scratches where a woman scuffed my rear bumper and drove off but no other damage.... Should be able to get a picture up on sunday after the exhaust is taken off.
Sent from my iPhone 5s using Tapatalk