Front Lip/splitter

[Toe-side]

going back to original comments would this not fit the bill......its not carbon but who will know?
http://www.ebay.co.uk/itm/SPLITTER-FRONT-BUMPER-LIP-SPOILER-FOR-BMW-Z4-SERIES-E85-E86-BEFORE-FACELIFT-/221324650319?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3387fa274f

 

[benben]

Yeah this one is oright but its ABS not carbon. I am just worried it will look really cheap and aftermarket etc. plus doesnt ship to Aus.

I am starting to think Chrisba is right and the way to go is to upgrade to a different bumper thats gna cost a bit after re-paint and install

 

[Toe-side]

I think it will look ok but the shipping is a definite problem for you.

Any bigger pics of those black 107's (?) and your car......... considering a similar colour combo myself but there are few decent pics available

 

[chrisba]

Yeah this one is oright but its ABS not carbon. I am just worried it will look really cheap and aftermarket etc. plus doesnt ship to Aus.

I am starting to think Chrisba is right and the way to go is to upgrade to a different bumper thats gna cost a bit after re-paint and install

If you go the facelift option rather than M then it shouldn't cost much more than some of the splitters you've been looking at.

You should be able to pick up a facelift bumper for around £100 plus grills and spraying. Some of those splitters were pushing £200!

 

[NeilP]

What about the skoda fabia splitter?

http://www.ebay.co.uk/itm/Genuine-Skoda-Fabia-Front-Bumper-Splitter-Part-No-5J08070619B9-/251153661821?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3a79ecbf7d

Marius fitted it to his Z4, think it compliments the front quite well!

https://secure.flickr.com/photos/marius_snap/9486520971/

https://secure.flickr.com/photos/marius_snap/9489302190/

 

[Toe-side]

I feel slightly inadequate looking at this thread on a sister site..............http://www.zpost.com/forums/showthread.php?t=487668&highlight=splitter
Their garage
Their attention to detail
Their post detail.
Their budget
Wow that is a splitter properly installed

 

[scorcher]

I've adapted a Cupra R PU splitter, as my car is loooow and my drive is steeeeep!

And for less than £50 it doesn't matter if it scrapes a bit

 

[Mangozac]

I've adapted a Cupra R PU splitter

Pics?

 

[benben]

I think it will look ok but the shipping is a definite problem for you.

Any bigger pics of those black 107's (?) and your car......... considering a similar colour combo myself but there are few decent pics available

They are not 107s!!! they are GTC. pictures posted on this thread:
http://www.z4-forum.com/forum/viewtopic.php?f=6&t=58914&p=867320#p867320

Pictures don't do it justice though, look better in real life for sure.

 

[Z4MO]

Have a look through this thread and i'm sure you will agree its a classy splitter

http://www.z4-forum.com/forum/viewtopic.php?f=9&t=50543&hilit=splitter

 

[chrisba]

Have a look through this thread and i'm sure you will agree its a classy splitter

http://www.z4-forum.com/forum/viewtopic.php?f=9&t=50543&hilit=splitter

My favourite Zed of all time

 

[Mangozac]

Have a look through this thread and i'm sure you will agree its a classy splitter

http://www.z4-forum.com/forum/viewtopic.php?f=9&t=50543&hilit=splitter

That splitter does look fantastic!

 

[Toe-side]

I think it will look ok but the shipping is a definite problem for you.

Any bigger pics of those black 107's (?) and your car......... considering a similar colour combo myself but there are few decent pics available

They are not 107s!!! they are GTC. pictures posted on this thread:
http://www.z4-forum.com/forum/viewtopic.php?f=6&t=58914&p=867320#p867320

Pictures don't do it justice though, look better in real life for sure.

Oooops apologies... car/wheels looks good ........... still trying to find some quality shots of a preface with black 107's :wink: