Front camber

[Bodyboarder]

Hi all … I know the front camber can’t be adjusted on my e85 .. but what do they run ?

Thanks

 

[enuff_zed]

Hi all … I know the front camber can’t be adjusted on my e85 .. but what do they run ?

Yes it can. Take out the camber pins from the top mounts and go to a reputable operator with a Hunter alignment kit. They will set it perfectly for you.

 

[Bodyboarder]

So basically use the elongated bolts holes to adjust the camber ?

 

[Bodyboarder]

And what would be a good road camber set up be ? Thanks

 

[Matt Scarbro]

If you would like a touch more camber, this can be achieved with fixed camber plates at the top mount so you can use with oem suspension and don’t increase NVH.

I fitted these, adding 0.7* for nice road values and then of course the slotted top mounts take care of the fine tuning.

 

[plenty]

Think it's about 1.2 with the pins out. You don't need much more than that for the road. Better to add caster using ///M lollipops.

 

[brillomaster]

Can I ask, where did you get your camber plates from? Have seen dinan ones, but sure they only shipped from America and were quite pricey...

 

[Bodyboarder]

Actually bought a set of these and fitted …. And I’ve got 1.9 degrees on front camber …. And looks like some play in the top bolt slots … so could go more I think . Just wanting know what people would recommend. Feels good now and has a lot better turn in and mid corner grip .

 

[Matt Scarbro]

Personally I would max out whatever you can get evenly across the front.

So if you can get 1.8* on one side and 2* on the other, 1.8* would be my suggestion.

I slotted my top mounts and strut brace further for a touch more, but current setup is with an iPhone and an aluminium strip so I don't think those numbers would be of value!