My Reflectors on the side of my front Bumper are now starting to look quite shabby. Was wondering if anyone knows if you can by them seperate from the bumper?
Front Bumper reflector
- Thread starter jamiecarpenter
- Start date
Im also trying to find this part - any numbers?
Search realoem - no joy, maybe i searched wrong?
Also if i want to buy the clips etc for the bumper to be refitted properly, what bits do i need? Its getting sprayed and I want to buy all the bits just in case anything breaks when its being taken off etc
cheers
jamie
Search realoem - no joy, maybe i searched wrong?
Also if i want to buy the clips etc for the bumper to be refitted properly, what bits do i need? Its getting sprayed and I want to buy all the bits just in case anything breaks when its being taken off etc
cheers
jamie
Part numbers are: 63147162737 [left reflector] & 63147162738 [right reflector]. Also required nut 51418176418 (x4)....
http://www.realoem.com/bmw/showparts.do?model=DU52&mospid=49421&btnr=63_0760&hg=63&fg=10
Got mine mail order from Jamie at Soper BMW...
http://www.realoem.com/bmw/showparts.do?model=DU52&mospid=49421&btnr=63_0760&hg=63&fg=10
Got mine mail order from Jamie at Soper BMW...
All clips and fittings of the front bumper are reusable. The only one to get some replacements for may be the fittings under the wheel arch liner that can become a bit tired or over time have the wrong sort fitted used (should be flush with locking pins in)
Alignment is almost solely by the clamp across the front bonnet line. The rest is fixed. Headlights are adjusted to fit the position of the bumper cover.
BTW - no need to remove the bumper to get the side inserts fitted. IIRC you can flex the wheel arch liner out the way (but I might be making that up)
Alignment is almost solely by the clamp across the front bonnet line. The rest is fixed. Headlights are adjusted to fit the position of the bumper cover.
BTW - no need to remove the bumper to get the side inserts fitted. IIRC you can flex the wheel arch liner out the way (but I might be making that up)
Interesting.... I wonder if the nuts cuts the thread into the plastic pin, like on the bonnet badges?Z4 Coupe said:Bummer
I was hoping it just pulled off and clipped back in. I also didn't get any nuts but I can't see how they would attach as the pins don't have a thread on them?