Feeding wires from boot to cabin. HELP

S

samax92

Member
Ive got a sub/amp in the boot ready to wire into my headunit. i just cant find where to get the cables through to the cabin. once theyre there i can run it under the handbrake/gearstick/ashtray.

someone please help me :)
 
samax92 said:
Ive got a sub/amp in the boot ready to wire into my headunit. i just cant find where to get the cables through to the cabin. once theyre there i can run it under the handbrake/gearstick/ashtray.

someone please help me :)
Click to expand...

If you lift the carpet against the back wall of the boot you can actually get through a 'hole' into the speaker compartment behind the seats. I believe the hole is on the right of the boot, behind the carpet. From here you just run the wire under the centre console. I used this method when i installed my DICE.

Image shows roughly where hole is located behind carpet...

2sajtqo.jpg
 
There's also a way through the top left corner (above the handle of the brolly in the above shot)

Main loom goes through there as that's where I had to follow for bluetooth retrofit, then across to the centre console.

Be ready to strip half a car.
 
wht will need stripping back for the route via the hole on the right of the picture? will i get away with just pulling carpet back and taking off the plastic trim covers behind the seat (e.g. the cubby hole)
 
I put some pics up when I refitted my Intravee. It's easy enough to get wiring from the boot through the left side of the bulkhead and into the cabin.

http://www.z4-forum.com/forum/viewtopic.php?f=31&t=45207
 
You must log in or register to reply here.
Back
Top Bottom