Exhaust tailpipe flap?

Kolobos

Member
 Scunthorpe
Obviously as a new owner I'm learning about my new car and I just noticed a flap in the drivers side of the twin exhaust tailpipe. What is it for, what does it do, can it be modified as a modification in any way?

Curious,
Steve.
 
Kolobos said:
Obviously as a new owner I'm learning about my new car and I just noticed a flap in the drivers side of the twin exhaust tailpipe. What is it for, what does it do, can it be modified as a modification in any way?

Curious,
Steve.

It’s for sound regs, search for “golf T mod” on here :thumbsup:
Rob
 
Kolobos said:
Thanks Rob, not found anything yet?

Probably because it's "golf tee mod" :wink:

https://m.youtube.com/results?search_query=Z4+golf+tee+mod
 
I think mine could be seized or faulty, looked seized and like it hasn't been open for a while so i gently opened it and it has remained open since. I would therefore think it is now modified? Maybe now its moved and once its proper warmed up on a run, it might close again?

Steve.
 
Seen this mod over the years but inspired by the video link I've just tried it on my 35i. Look for "vacuum caps" or similar - 5mm is the size.

https://www.ebay.co.uk/itm/5mm-End-Caps-End-Covers-for-Tubes-Rods-Threads-rubber-plastic/252714094575?hash=item3ad6ef0fef:m:mmb1XcQnFFMtuyXsEYRPUIw

Very easy to do but not really worth a lot. As the video shows it's a little more "crackly" at start up but that's about it. I'll leave it for a few weeks but then probably return it to standard. The thing that did surprise me was the strength of the actuator spring on the flap.

Still, you don't know if you don't try.
 
Hi,
Thanks for the info, mine has returned to normal and was probably stuck due to lack of use, but now I'm using it it's all back as it was and as you say I didn't notice much difference so will leave it as it is.

Steve.
 
There was a link on another thread the other day that said they were 4mm internal diameter. Are those 4mm?

Mine make a little noise when opening/closing which on country lanes is annoying because it sounds louder. At least I hope it’s the flap!

Thinking of doing this mod. Have you seen itsjoel on YouTube? He has the precious gem Z4 (e86?) and says that Carly can open the flap when the app is running, so if I get Carly and it does the same, I could test it that way (obviously wouldn’t get it just for that!)
 
Don't know about 4mm.

I ordered 5mm, received 5mm and on they went without a problem and didn't feel like they were going to fall off. :D

The site says the actual I/D is 4.8mm with a wall thickness of 1mm.

I ordered 4 and used 2. Anyone passing Solihull PM me and call in. You can have the 2 left over. :thumbsup:
 
ihadablackdog said:
There was a link on another thread the other day that said they were 4mm internal diameter. Are those 4mm?

Mine make a little noise when opening/closing which on country lanes is annoying because it sounds louder. At least I hope it’s the flap!

Thinking of doing this mod. Have you seen itsjoel on YouTube? He has the precious gem Z4 (e86?) and says that Carly can open the flap when the app is running, so if I get Carly and it does the same, I could test it that way (obviously wouldn’t get it just for that!)

Hi, the e86 doesn’t have any exhaust (silencer) valves, I’ve got Carly but it doesn’t control the e89 20i exhaust valve? :?
Rob
 
Turns out I didn’t see it on YouTube, I saw it in the Carly app itself! I don’t have Carly, only the free download which says what “might” be available, so I guess it isn’t on an e89?
 

Attachments

  • 940E7711-01B3-42D8-9AB4-A21AF5D9AAFB.png
    940E7711-01B3-42D8-9AB4-A21AF5D9AAFB.png
    126.6 KB · Views: 790
ihadablackdog said:
Turns out I didn’t see it on YouTube, I saw it in the Carly app itself! I don’t have Carly, only the free download which says what “might” be available, so I guess it isn’t on an e89?

I can’t say which other models it may work on, but it doesn’t function on the 2.0 range :?
Rob
 
Smartbear said:
ihadablackdog said:
Turns out I didn’t see it on YouTube, I saw it in the Carly app itself! I don’t have Carly, only the free download which says what “might” be available, so I guess it isn’t on an e89?

I can’t say which other models it may work on, but it doesn’t function on the 2.0 range :?
Rob

Bugger, mine's a 20i....
 
Smartbear said:
ihadablackdog said:
Turns out I didn’t see it on YouTube, I saw it in the Carly app itself! I don’t have Carly, only the free download which says what “might” be available, so I guess it isn’t on an e89?
or 35i

I can’t say which other models it may work on, but it doesn’t function on the 2.0 range :?
Rob
 
It's 4mm, fitted mine last week, quite happy with the increased exhaust sound :thumbsup:
 

Attachments

  • IMG_6135.jpg
    IMG_6135.jpg
    361.8 KB · Views: 301
Smartbear has taken me up on my offer of the Silicon Hose Ends, just to save anyone else sending a PM, :thumbsup:
 
Back
Top Bottom