Eurostyle Tips GROUPBUY for the Z4M??????

N

NVUZ4M

Member
Hi guys

Would any of you be interested in a group buy on these Eurostyle Tips for the Z4M? I've spoke to the guy on ebay and he will do a set for £130 delivered if we can get 5 or more people?

Heres his ebay link with the Tips fitted on a Z4M

https://www.ebay.co.uk/itm/263853829338?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

IMAG10041_zpsljkfp3xj.jpg
 
NVUZ4M said:
ugly
Click to expand...

You wouldn't happen to be the seller, would you? First post and all...

These are similar for a fraction of the price: https://www.ebay.co.uk/itm/Universal-Round-2-1-4-Flat-Exhaust-Tip-Car-Stainless-Steel-Tail-Pipe-Muffler/123065814482?fits=Car+Make%3ABMW&hash=item1ca74b4dd2:g:-zQAAOSw4vJaybmn
 
Scooba_Steve said:
You wouldn't happen to be the seller, would you? First post and all...

These are similar for a fraction of the price: https://www.ebay.co.uk/itm/Universal-Ro ... Sw4vJaybmn
Click to expand...

No, i'm actually cuddy off the M3cutters site, i'm running a group buy on there at the moment. popped over here to see if we could get a few more people in on it.

And those tips you posted are cheap Chinese crap. but each to their own I suppose
 
They do like good. 10mm bigger on the O/D so will probably suit the gap better. Do you know what grade stainless they are using, ideally it needs to be 316.

I'm interested if it is :thumbsup:
 
Yorkie Z said:
They do like good. 10mm bigger on the O/D so will probably suit the gap better. Do you know what grade stainless they are using, ideally it needs to be 316.
Click to expand...

I think its 304 mate
 
I was looking on eBay at these earlier in the week.

I could be up for a set.

Would love to see some more pics of how the internals look. Is the internal pipe hard to see?
 
srhutch said:
I was looking on eBay at these earlier in the week.

I could be up for a set.

Would love to see some more pics of how the internals look. Is the internal pipe hard to see?
Click to expand...

I've ordered a set, I'll get some pictures up when I get them fitted. :thumbsup:
 
How easy/otherwise is it for a total techinical muppet to remove pop rivets and secure the new tips with new pop rivets?

(Not me of course - asking for a friend! :wink: )
 
RickRob said:
How easy/otherwise is it for a total techinical muppet to remove pop rivets and secure the new tips with new pop rivets?
Click to expand...

It’s not a big job at all, plenty of guides on m3 cutters on fitting
 
because an M set is 4 tips, if you have a non M, you could go in with another forum member and get 2 sets of 2 for £65 each!
 
paullyjay said:
because an M set is 4 tips, if you have a non M, you could go in with another forum member and get 2 sets of 2 for £65 each!
Click to expand...

Assuming the internal diameter is the same on a non ///M
 
Mine arrived last Friday, and I've just fitted them :D

Meant to be the same length, but are around 10mm longer I would say.

Might need to play around with the alignment a bit one day.

Size Comparison
IMAG1647.jpg

Fitted, and coated with some high temp wax
IMAG1648.jpg

IMAG1656.jpg

IMAG1657.jpg
IMAG1659.jpg
IMAG1660.jpg
 
You must log in or register to reply here.
Back
Top Bottom