Euro Style Exhaust tips fitted (Pics)

[srhutch]

Mine arrived last Friday, and I've just fitted them

Meant to be the same length, but are around 10mm longer I would say.

Might need to play around with the alignment a bit one day.

Size Comparison


Fitted, and coated with some high temp wax

 

[Simon 3.2M]

Nice

 

[Beatman]

looking good

 

[mr wilks]

Get them boxes up 15mm & they would be knockout Mr H

 

[srhutch]

Get them boxes up 15mm & they would be knockout Mr H

I know, tried but struggling. Will have another go soon. OEM boxes so shouldn’t be an issue.

 

[Beedub]

Yeah they just don't look right with the way they sit.... Need some time spent on adjustment.

Tips look ACE tho...

 

[srhutch]

Yeah they just don't look right with the way they sit.... Need some time spent on adjustment.

Tips look ACE tho...

Still OEM boxes so should adjust fine. Probably take 5 minutes next time.

 

[Mangozac]

I'm confused - why are the boxes sitting 15mm too low?

 

[Yorkie Z]

I've fitted some of these also. Really happy with the results. The seller is excellent and the tips are really good quality.

 

[srhutch]

I'm confused - why are the boxes sitting 15mm too low?

It can only be the joint, as that's the only place you can make adjustment

 

[Marlon]

Tips look good but agreed about slightly too low. I have the same issue after my DLV back-box mod.
How tricky is it to raise slightly - big job?

 

[Yorkie Z]

No gap on mine, just takes a bit of playing around with

 

[Mangozac]

It can only be the joint, as that's the only place you can make adjustment

Oh I see, you just haven't adjusted them yet!

 

[srhutch]

It can only be the joint, as that's the only place you can make adjustment

Oh I see, you just haven't adjusted them yet!

I tried yesterday, but it wasn’t happening for some reason or other.

 

[Zoomer]

I guess you can’t do this on the pre facelift 3.0 as the outlets aren’t round? I have MM tips at the moment but these look even better

 

[Mangozac]

It can only be the joint, as that's the only place you can make adjustment

Oh I see, you just haven't adjusted them yet!

I tried yesterday, but it wasn’t happening for some reason or other.

It is a pain. Last time I had them off I found i had to push them up right past where I wanted them, then bolt up the clamps.

So where are these from?

 

[Bing]

They are a lot bigger - like that a lot Steve. Once the alignment is sorted they will look perfect

 

[RedUn]

It can only be the joint, as that's the only place you can make adjustment

Oh I see, you just haven't adjusted them yet!

I tried yesterday, but it wasn’t happening for some reason or other.

Use a trolley jack with a cloth on top, obviously don't go mad but go higher than planned and they settle somewhere near

 

[srhutch]

Oh I see, you just haven't adjusted them yet!

I tried yesterday, but it wasn’t happening for some reason or other.

Use a trolley jack with a cloth on top, obviously don't go mad but go higher than planned and they settle somewhere near

Think that is where I went wrong this time, not supporting them enough. Will sort next weekend hopefully.

 

[nige bcs]

Nice mod - well done ;-)