Hi All
I have an 04 plate z4 2.2 . It has been garaged since last November, I brought it out today for its mot and diagnostics check. It has come back with a number of error codes as follows.
1 (DME) (Engine Digital Motor Electronics) Fault 4 (below)
00279c (D M E) Thermostat map cooling activation (present)
002882 (D M E) Mixture preparation bank 1 (Absent)
002883 (D M E) Mixture preparation bank 2(Absent)
0028A2 (D M E) air path monitoring (Absent)
2 ABS-DSC (ABS-Dynamic Stability Control) Fault 1 (below)
005E19 ABS-DSC CAN data error from DME/DDE (DSC lamp on if error is present) Absent
3 SIM (SAFETY AND INFORMATION MODULE) Fault 1 (below)
0093E7 SIM undervoltage (Absent)
Not quite sure where to start with this lot.
I have an 04 plate z4 2.2 . It has been garaged since last November, I brought it out today for its mot and diagnostics check. It has come back with a number of error codes as follows.
1 (DME) (Engine Digital Motor Electronics) Fault 4 (below)
00279c (D M E) Thermostat map cooling activation (present)
002882 (D M E) Mixture preparation bank 1 (Absent)
002883 (D M E) Mixture preparation bank 2(Absent)
0028A2 (D M E) air path monitoring (Absent)
2 ABS-DSC (ABS-Dynamic Stability Control) Fault 1 (below)
005E19 ABS-DSC CAN data error from DME/DDE (DSC lamp on if error is present) Absent
3 SIM (SAFETY AND INFORMATION MODULE) Fault 1 (below)
0093E7 SIM undervoltage (Absent)
Not quite sure where to start with this lot.
