Electric Folding Mirrors

A

alexhall

Member
Hi Guys,

New to the forum.

About to attempt the Elec folding mirror retrofit.

I have looked at my car already. There is a cable and connector hanging around loose behind the glove box which is to connect to the folding mirror module. I have ordered this module and the door switch with the button to fold the mirrors in, as well as some second hand mirrors off a z4m (complete with auto dimming)

When i looked at the looms going to the mirrors in the doors, i noticed all but one of the pins in the connectors is wired, surely this would mean, they are pre-wired for elec folding mirrors, especially with the fact that the fuse is present also..

All i understand that you need is:

Door Mirror swtich
2 x Elec folding mirrors
folding mirror module

If anyone has anymore info on this, advice would be greatly appreciated. I have seen Ron Stygars poist on this and seen some of the pictures. It looks like he didnt even have the loom hanging down for the module, as he had to put all the wiring in,- i'm assuming its because its a US spec car and they dont pre-wire those?

Anyway, any further info would be appreciated. I am just waiting on the mirror swtich before i start everything, so about another week and I can post info up on here...

Alex
 
May be a stupid question i know (lol) but for the standard mirrors (non electric) do they simply just fold inwards? I know the electric ones kinda fold in and upwards...i tried to force mine a little in but they didnt budge. I probably need to apply proper force but I didnt wanna damage them in case I was forcing them the wrong way!? :D
 
Hi Alex - welcome. Nice mod and one I'd do if and when I came by a set of motorised units. I think you have it all in module, switch and mirrors. I read up on it sometime ago and believed all the loom was there and ready as BMW are lazy

My only comment would be as a reminder that if you break apart the door connector to retrofit any extra pins then don't turn ont he ignition else you'll have an airbag activation warning and need a £40 trip to the dealer to reset it.

V-man All mirrors fold. Look at the crease line. The action os more one of revolving the mirror up and in than folding. Some force needed first time.
 
some pics will be great for the whole mod , and some parts numbers for aall the parts that we will need in order to do the same mod we qwaiting your upgrade
 
Yes, as soon as I have the swtich I will get on it and will try and get some pics where poss. Will also post up the part numbers etc.

Also, just for reference, I have found the best place to get a set of Elec folding mirrors is Ebay.de seeing as BMW's are german, I guess that makes germany the best place to get spares! I have been hunting for months on ebay.co.uk/.com for folding mirrors and in loads of scrap years, but with no joy. One trip in ebay.de and I found a pair straight away. postage was only 15 Euros too!

I also know a guy up in London who can program loads of stuff on out cars, including remote operation of the soft top and remote op of folding the mirrors in and out, going up there next week, so will take some vids of that in action..
 
cool we will wait... PLZ upload the whole story on how you did it parts numbers pics of the instalations and some vids will be great as it will help us to understand how to do it thanks allot we will wait..............
 
Ditto the post above. As many pics and as much detail as possible would be good to show any others thinking of doing it the way forward! You could even post it in the 'how to' section! :thumbsup:
 
I honestly dont think folding mirrors are worth the effort or expense. I have them as they came on the car, but i dont think i would spec or retrofit them.
 
Ok,

So I now have the mirrors fitted to the car. BMW have told me the door switch and module will be in tomorrow morning, so I am just waiting for that before I can test the folding.

One thing I can tell you though, is that the drivers side is NOT pre-wired for folding and dimming. I have just spent a few hours adding these wires on the door side, which is actually pretty easy. I have made a note of the various pin numbers etc for anyone that wants to do this mod themselves.
Auto dimming now works on both sides of the car. I thought it rather odd that BMW should pre wire the passenger side for both folding and dimming but not the drivers side..

The only thing i have noticed, at the moment, the mirrors arent in the right position for viewing, as they dont look as if they are folded to the normal open position when i compare them to the old ones, but obviously cant fold/unfold them yet as i dont have module fitted. Im wondering if i might have to change the bases, due to the fact that the motrised ones are off a german car?
If this is so, does anyone have any experience in changing the bases at all?

Obviously pics and youtube vids will follow.

Also, just to add, this retrofit has cost me in total £430 for everything. When you consider I have also got elec mirrors with auto dimming thats not too bad in terms of cost considering all of that would cost in exess of £1500 from dealer...
 
Ok guys,

So fitted the module and switch to the car and yes! everything works as it should! So, basically this mod is relatively easy, but you just need to add the wires on the drivers door, which is pretty easy!

Got nowhere to upload any pics at the moment, so if anyone wants any pics, i will gladly email, along with installation guides.

Just waiting for the module now so I can fold the mirrors in with the remote : P

I am assuming the Mirror module does not need coding to the car, as one would think it wouldn't work otherwise...
 
alexhall said:
Ok guys,

So fitted the module and switch to the car and yes! everything works as it should! So, basically this mod is relatively easy, but you just need to add the wires on the drivers door, which is pretty easy!

Got nowhere to upload any pics at the moment, so if anyone wants any pics, i will gladly email, along with installation guides.

Just waiting for the module now so I can fold the mirrors in with the remote : P

I am assuming the Mirror module does not need coding to the car, as one would think it wouldn't work otherwise...
Click to expand...


i want to send me the whole story, plz at [email protected] thanks mate
 
alex85 said:
I honestly dont think folding mirrors are worth the effort or expense. I have them as they came on the car, but i dont think i would spec or retrofit them.
Click to expand...

I guess it depends if you have to park on a narrow street where people drive like idoits or not
 
I like mine because when i put mine in the garage (folded) it's easier to walk between the car and the wall.
 
Yeah, I must admit, i did partly fit them as a gimicky thing!

But they are very handing, parking in tight spots etc. Where i am, there a lot of thoughtless drivers around and big vehicles going down roads they shouldn't... : P
 
Al,

Could you show me some pics of your Z with the clear lights? I'm thinking of upgrading to this and would like to know the look, before going ahead with it..

Cheers
 
You must log in or register to reply here.
Back
Top Bottom