I came to fit the eibach front springs but had a problem that the top coil does not fit over the dome of the top hat.
Do I need to use different ones?
The spring is a 112001004VA and th car is a 2003 3.0i with msport suspension.
We fitted the strut back in the car hoping the spring would settle over the dome but it hasn't so far.
Was a right pain fitting the spring by the way due to the way the Sachs strut compresses. We had to extend the piston then fit a couple of jubilee clips around the shaft to hold it in the extended position.
I also noticed that we need new top bearings as the rubber is cracked half way around. Should I just replace with standard?
Cheers
Do I need to use different ones?
The spring is a 112001004VA and th car is a 2003 3.0i with msport suspension.
We fitted the strut back in the car hoping the spring would settle over the dome but it hasn't so far.
Was a right pain fitting the spring by the way due to the way the Sachs strut compresses. We had to extend the piston then fit a couple of jubilee clips around the shaft to hold it in the extended position.
I also noticed that we need new top bearings as the rubber is cracked half way around. Should I just replace with standard?
Cheers