EasyDIS v44 for Z4 coding

T

trickadero

Member
Just picked up a 2005 roadster and am interested in making some coding changes. I've a working installation of INPA and EasyDIS v44 which I use for basic diagnostics on the e36, never used it for any coding though I believe it has limited capabilities. Does anyone know if I'll be able to code things like seat memory to key with my existing setup or do I need to look into something like NCS Expert or SSS?

I need a new cable to hook up to the Z4 before I can have a play, would be useful to know if I need to start searching out software and install instructions for another program though.

Thanks
 
Thanks both,

From what I've read coding was only removed from DIS post v44, there's certainly the option to code available through the menu's. Whether or not it'll work with the Z4, and what the limitations might be, I haven't been able to determine.

I only need an RS232 cable and I should be able to hook up my existing lead to the Z4 (cable is OBD/ADS switchable), but then I'll probably have to reconfigure the interfaces. I'll see if I can find a cable at work tomorrow and experiment.
 
You must log in or register to reply here.
Back
Top Bottom