When I had this code which was triggered when driving it reported rear end module open. It was the right hand micro switch behind the hinge. Very easy to swap. However they are now £100 each.
I had also changed both hall sensors prior. Just make sure you mark the three bolt holes for the hinge mech. I used a soldering iron to heat up the retaining screw which softened loctite. 30 mins per side
I had also changed both hall sensors prior. Just make sure you mark the three bolt holes for the hinge mech. I used a soldering iron to heat up the retaining screw which softened loctite. 30 mins per side