E89 Geometry

I

iwatchlive

Member
 doing the E of my BASE
Hi all

Does anyone have the correct geometry settings (i.e.factory recommended specs) for the E89 Sdrive 35i with 19" 296 wheels on RFT's (mine doesn't have sports suspension) as below
Front:
Camber: XX degrees
Castor: XX degrees
Toe: XX deg to XX deg
SAI: XX deg
Included Angle: XX deg

Rear:
Camber: XX to XX deg
Toe: XX deg to .XX deg.


thanks IWL
 
OK - I now have received this information from BMW for the 2009 35i model (without sports suspension) so my question has slightly changed.
The info I have gives ride height (per axle) on different size rims; along with all the geometry settings for axis; camber; toe in & toe adjustment; castor etc

On the geometry info there are two set-ups and some of the settings are the same as each other but there are differences on other parts: Anyone know what the difference between these two are?

First one called "Wheel Alignment VDC Fahrwerk" and the other "Wheel Alignment Serienfahrwerk"; I think Fahrwerk is chassis and Serienfahrwerk means series chassis but I dont do much German so I am guessing that the first is standard set up and the second to be sport settings or M sport suspension; I am unsure?

Any one have any ideas??

Thanks for all your input
 
You must log in or register to reply here.
Back
Top Bottom