E86 Window closure on locking

[Djcla]

Hi
If I unlock my zed and hold keyfob button down the windows will open and then hold lock button down on my key fob only the driver's side closes. This can't be right surely both windows function fine using in car buttons. Just wondering if any thoughts on how to resolve?

 

[markplant]

You may need to do a window reset

 

[markplant]

https://z4-forum.com/forum/viewtopic.php?f=2&t=106281&p=1544206&hilit=Window+reset#p1544206

 

[biojo]

mine was a faulty motor,

do a window reset on that side, but if the auto up. doesnt work then it could be saem as mine

 

[Djcla]

Thanks all , no success so far .. should the passenger auto up from the button inside the car?

 

[markplant]

Thanks all , no success so far .. should the passenger auto up from the button inside the car?

Yes it should be one touch same as drivers side

 

[Djcla]

Thanks all , no success so far .. should the passenger auto up from the button inside the car?

Yes it should be one touch same as drivers side

Cheers I'll check it and if I find it doesn't work then I guess it's likely to be motor right?

 

[Djcla]

mine was a faulty motor,

do a window reset on that side, but if the auto up. doesnt work then it could be saem as mine

Where did you buy the motor and how much effort involved in fitting?

 

[markplant]

Thanks all , no success so far .. should the passenger auto up from the button inside the car?

Yes it should be one touch same as drivers side

Cheers I'll check it and if I find it doesn't work then I guess it's likely to be motor right?

If the window is going up an down ok , it won't be the motor

 

[Djcla]

Yes it should be one touch same as drivers side

Cheers I'll check it and if I find it doesn't work then I guess it's likely to be motor right?

If the window is going up an down ok , it won't be the motor

Yes it's fine if you use button in car, I'm going to test the auto close from inside as well but suspect it won't work.

 

[fd3chris]

My passenger didn't work from driver side auto up . Recoded with Carly and it does now.

 

[biojo]

mine was a faulty motor,

do a window reset on that side, but if the auto up. doesnt work then it could be saem as mine

Where did you buy the motor and how much effort involved in fitting?

luckily mine was under warrenty, so wasnt cheap for them. but replacements could be had online for much cheaper, you should replace the inner door card (weather protection) if you do it your self it can be saves and re used, then some butyl bead to reseal it.

the motor can be switched over by reaching round and its few bolts, so you dont have to take the window/regulator out

 

[Djcla]

Well auto close on passenger side does not work when inside the car , so it's definitely meant to auto close right?

 

[mac27040]

i thought auto close on passenger side needs to be coded FH_BEIFAHRERTUER_TIP_ZU vai NCSexpert or Carly

 

[Djcla]

i thought auto close on passenger side needs to be coded FH_BEIFAHRERTUER_TIP_ZU vai NCSexpert or Carly

I'm sure I'd read somewhere else that auto close on passenger side doesn't work by design for safety reasons..

 

[mac27040]

i thought auto close on passenger side needs to be coded FH_BEIFAHRERTUER_TIP_ZU vai NCSexpert or Carly

I'm sure I'd read somewhere else that auto close on passenger side doesn't work by design for safety reasons..

May be but I have it working by coding it

 

[Jl-c]

My 2007 E86 opens and closes both windows when holding the button down on the remote. When I got the car the drivers door behaved like your passenger one does. Ran through the reset procedure twice....all good. Remember to turn ignition off after the reset as I think that is when it ‘remembers’ it!