E86 coding ABS unit

bigwinn

bigwinn

Elite
 Lincoln UK
Site Supporter
Hi all

I have a few other jobs to sort on the coupe with the loom issues

One is that I believe someone has swapped the ABS unit over (no idea why)

I’m rebuilding my bmw tools as the laptop I had died. Once done I am going to try to recalibrate it first as it’s showing calibration errors.

If I need to code it to the car does anyone have guidance how to do that?

I found this document which is e39 principles which look (I assume) similar. I also presumed the vin needs entering using ncsexpert.

Thanks in advance

Stuart
 

Attachments

Following - I need to do this exact same thing. The ABS (DSC) module in my Z4 was damaged from water ingress and was replaced with a second hand module. This resolved the dash errors, but still results in a persistent module conflict.
 
Didn’t the E86 use the DSC unit that the E89 used?..if so that would be a better coding option..imho
 
bigwinn said:
I think the ABS unit on most I’ve seen is the later unit ending in 174
Click to expand...

Dynamic Stability Control Mk60 and Mk60E5​

The DSC Mk60 is fitted on vehicles with 4-cylinder engines.

The DSC Mk60E5 is fitted on vehicles with 6-cylinder engines.

A variant of the DSC Mk60E5 is fitted in the E60 M5. This variant is adapted to the M5 / M6.

Functional description, see Vehicle Engineering Diagnosis (VTD):

340104107 (DSC Mk60E5, DSC Mk60) or 340103017 (only E85, E86).
 
B21 said:
Didn’t the E86 use the DSC unit that the E89 used?..if so that would be a better coding option..imho
Click to expand...
I think I’ve read that when doing the coding you have to select e89 platform in ncs
 
  • Like
Reactions: B21
All sorted

Calibrated and 4/5 issues went including steering angle sensor code

Last one was an ABS sensor

Now have zero codes which is pleasing.

Didn’t have to code it in
 
You must log in or register to reply here.
Back
Top Bottom