E86 2006 Trim under bumper plastic parts

Scooby870

Member
Hi
I am looking for trim underneath the front bumper on my E86 2006.

Currently just have the bumper connected to the side arch and top on the engine bay. If this helps.

The two parts that connect from the wheel on both sides
And the parts to the radiator and I think a tray to protect Underneath

Apologies for the vague description
I am learning slowly

Thanks
 
[ref]Scooby870[/ref], whereabouts are you, and how much of a rush are you in?

I will be breaking a facelift 2.0 E85 at the end of this month.
I believe the parts you need will be the same? Happy to be corrected though if anyone knows better.
Just had a grovel in the gravel and they all look in decent condition.
I should warn you that the corner sections are highly sought after and not cheap if in good nick.

I'll try to dig out the realoem illustrations so you can maybe confirm which bits you need.

In the meantime, I will add you to my 'pre-breaking spreadsheet' until you either accept or reject.

Consider that it may be simpler for you to come to me and swap everything onto your car here? Unless you're too far away. Weigh up postage versus fuel.
 
Think these are the bits you need? I have confirmed they do fit all.
The under-tray has two designs. Some don't have the raised sides, but they all fit the same.

Not sure if you are missing anything else? I guess until you see the diagrams you may not know, but the car is currently complete so the bits will be there.
Capture 1.PNG
Capture 2.PNG
 
Yes
These are the bits I am missing
Also I will take the front wheel arch liners.
The previous owners put 19” wheels on the car and the tyres rubbed the inside front on the arch 😡

Thankyou for helping me out
Appreciated!!
 
Scooby870 said:
Yes
These are the bits I am missing
Also I will take the front wheel arch liners.
The previous owners put 19” wheels on the car and the tyres rubbed the inside front on the arch 😡

Thankyou for helping me out
Appreciated!!
Added to the list, but one has a headlight access panel missing so you'd need to swap yours over.
 
Back
Top Bottom