E85 Seat Parts

oldgitdave

Senior member
 Derbyshire
I have the following parts from a pair of E85 sports seats free to collect to anyone who can make use of them, located in Smalley, Derbyshire. You can take all or just the parts you need. I'll keep the thread updated & will leave them on here for a couple of months or so. After that, if anything is left it'll be scrapped.

Two bare seat bases with all 4 motors & pre-tensioners etc. in working condition. You or I could split the required part from the frame if you want just one. Update: both pre-tensioners + seatbelt sockets have gone to bz4kev
Update: remaining seat bases gone to woolybear
20190423_152114.jpg
20190423_151948.jpg
Two bare seat backs ( can't see there being much call for these :D ).
20190423_151829.jpg
Memory control module for the drivers side & electric controller for the passenger side. Both fully working. Update: gone to Hagasan
20190423_152818.jpg
Driver & passenger controller covers in grey. Update: gone to Hagasan
20190423_152208.jpg
Driver & passenger seat backs in good condition also in grey.
20190423_152504.jpg
20190423_152524.jpg
Both shoulder seatbelt supports though the plastic support underneath is broken on one. Update: gone to jamesditchy
20190423_152833.jpg
Two sports headrests in what I think is Oregon Red. Update: gone to IAmOrion
20190423_152619.jpg
 
Hi Dave, I'd be interested in the two switch banks and the covers for these two please as someone "popped" the circular parts thinking they were covers.. (not me). Please let me know, thanks.
 
Hagasan said:
Hi Dave, I'd be interested in the two switch banks and the covers for these two please as someone "popped" the circular parts thinking they were covers.. (not me). Please let me know, thanks.
Hi Hagasan, yep I'll put these to one side for you. Please PM me with your plans for collection & we'll take it from there :thumbsup: .
 
bz4kev said:
Hi could I have the pre tensioners and buckles please :D can collect from you thanks
Hi Kev, not a problem mate. Do you want me to remove them in advance, can't see it being too difficult? Bit of a trek from the Wirral but an excuse for a nice drive eh? :driving: . PM me & we'll get it sorted :thumbsup: .
 
oldgitdave said:
bz4kev said:
Hi could I have the pre tensioners and buckles please :D can collect from you thanks
Hi Kev, not a problem mate. Do you want me to remove them in advance, can't see it being too difficult? Bit of a trek from the Wirral but an excuse for a nice drive eh? :driving: . PM me & we'll get it sorted :thumbsup: .
Both pre-tensioners + seatbelt sockets have gone to bz4kev. I'll get them removed for you as discussed :thumbsup:
 
oldgitdave said:
Hagasan said:
Hi Dave, I'd be interested in the two switch banks and the covers for these two please as someone "popped" the circular parts thinking they were covers.. (not me). Please let me know, thanks.
Hi Hagasan, yep I'll put these to one side for you. Please PM me with your plans for collection & we'll take it from there :thumbsup: .

PM sent
 
Hagasan said:
oldgitdave said:
Hagasan said:
Hi Dave, I'd be interested in the two switch banks and the covers for these two please as someone "popped" the circular parts thinking they were covers.. (not me). Please let me know, thanks.
Hi Hagasan, yep I'll put these to one side for you. Please PM me with your plans for collection & we'll take it from there :thumbsup: .

PM sent

PM replied to. Controller switch banks & their covers are yours :thumbsup: .
 
Just thought I'd bump this just the once. Seat bases & backs still available. 4 working motors in each seat if anyone needs one? I'm quite happy to remove the motor of your choice.
Both grey seat backs still available as are the seatbelt shoulder strap supports & the 2 headrests.

Items already gone: both seat switch banks & covers, both seat belt pre tensioners & buckles.

These will all go the to tip at the end of next week if nothing else is wanted. Thanks chaps :thumbsup: .
 
oldgitdave said:
Just thought I'd bump this just the once. Seat bases & backs still available. 4 working motors in each seat if anyone needs one? I'm quite happy to remove the motor of your choice.
Both grey seat backs still available as are the seatbelt shoulder strap supports & the 2 headrests.

Items already gone: both seat switch banks & covers, both seat belt pre tensioners & buckles.

These will all go the to tip at the end of next week if nothing else is wanted. Thanks chaps :thumbsup: .

Any ideas on postage costs for the Red headrests? (If you didn't mind posting - you're a good 5-6 hour return journey which is too far for me lol)
 
IAmOrion said:
oldgitdave said:
Just thought I'd bump this just the once. Seat bases & backs still available. 4 working motors in each seat if anyone needs one? I'm quite happy to remove the motor of your choice.
Both grey seat backs still available as are the seatbelt shoulder strap supports & the 2 headrests.

Items already gone: both seat switch banks & covers, both seat belt pre tensioners & buckles.

These will all go the to tip at the end of next week if nothing else is wanted. Thanks chaps :thumbsup: .

Any ideas on postage costs for the Red headrests? (If you didn't mind posting - you're a good 5-6 hour return journey which is too far for me lol)

I'll dig them out & get a postage cost for you. I think I have a suitable box in the attic.
 
oldgitdave said:
I'll dig them out & get a postage cost for you. I think I have a suitable box in the attic.

I would guestimate £10 - £15 with MyHermes or some other economy courier -- Only if it's not too much trouble though - I would perfectly understand if you didn't want the hassle :)
 
IAmOrion said:
oldgitdave said:
I'll dig them out & get a postage cost for you. I think I have a suitable box in the attic.

I would guestimate £10 - £15 with MyHermes or some other economy courier -- Only if it's not too much trouble though - I would perfectly understand if you didn't want the hassle :)

Sounds about right. No hassle, I'd rather they get reused rather than just binning them.
 
oldgitdave said:
IAmOrion said:
oldgitdave said:
I'll dig them out & get a postage cost for you. I think I have a suitable box in the attic.

I would guestimate £10 - £15 with MyHermes or some other economy courier -- Only if it's not too much trouble though - I would perfectly understand if you didn't want the hassle :)

Sounds about right. No hassle, I'd rather they get reused rather than just binning them.

Collect+ website says £6.29 economy or £7.29 standard to Cambridge. Box & packaging sends it just over 2kg weight. Let me know if you're interested & send me a PM to sort. :thumbsup: .
 
I don't need seat motors in any way, but if no-one has a need for them and you're finding yourself binning them I'd make use of them on an Arduino project.
 
jamesditchy said:
Hi

Could I take the shoulder supports if still available. Let me know ££ I owe you

Jay

Jay assuming you want postage Collect+ is £3.99 economy or £6.49 standard to Liverpool. I have a box so no problem there. Let me know & PM me to sort :thumbsup: .
 
greg81 said:
I don't need seat motors in any way, but if no-one has a need for them and you're finding yourself binning them I'd make use of them on an Arduino project.

Hi Greg, sounds interesting :) . Robot arm actuators or something? Where are you? If you're able to collect then you're welcome to them no problem at all. Not sure I want dismantle all 8 from the seat bases & they'd probably be quite heavy to post once removed. Fell free to send me a PM to discuss. :thumbsup: .
 
oldgitdave said:
Collect+ website says £6.29 economy or £7.29 standard to Cambridge. Box & packaging sends it just over 2kg weight. Let me know if you're interested & send me a PM to sort. :thumbsup: .

Sounds good to me - will PM now :thumbsup:
 
oldgitdave said:
greg81 said:
I don't need seat motors in any way, but if no-one has a need for them and you're finding yourself binning them I'd make use of them on an Arduino project.


Hi Greg, sounds interesting :) . Robot arm actuators or something? Where are you? If you're able to collect then you're welcome to them no problem at all. Not sure I want dismantle all 8 from the seat bases & they'd probably be quite heavy to post once removed. Fell free to send me a PM to discuss. :thumbsup: .

If greg81, doesn't want the seat bases - may I have 2nd dibs please?

As I have a small ongoing Seat project to do & would be using the bases, runners & motors too :thumbsup:

And I could collect, this weekend - your circa 26 miles from me..
Cheers, Paul..
 
Back
Top Bottom