E85 Passenger Xenon Headlight Unit.
- Thread starter peeblezZ4
- Start date
Scottish Borders
I will have some going in about a month if you haven't sourced one by then. I made myself some custom headlights (https://z4-forum.com/forum/viewtopic.php?f=2&t=100058) back in September 2017, and I'm currently in the process of making myself a newer set so these will be for sale soon
IAmOrion said:
IAmOrion said:
I'm not in too much of hurry so let me know when they are available. My passenger side unit has a broken clip and a lot of condensation. I'm going to take it out soon and have a proper look at whether or not I can get it sealed properly/condensation free. The two clips which are intact and hold the lamp in place aren't doing too bad a job to be fair.
peeblezZ4 said:
You know there’s clip replacements you can buy right? They replace broken clips and screw into the headlight - assuming the screw posts on the headlight aren’t broken that is. Example: https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F201652971902
(That link is for left side, you can obv also get right side, or they also sell complete kit so 2 sets, 1 per side)
I'm assuming that the screw post might be broken. I had a local (Good) body shop do some paintwork for me a few weeks ago and he had the bumper off. When I collected the car he mentioned that the lamp had probably been damaged in a prior accident with the previous owner and I reckon that, if their was an easy fix like you suggest, he'd have mentioned it but you never know. I'll get the bumper off and take a look over the next couple of weeks but really appreciate your help. I'm just back from a 200 mile round trip to have my roof motor relocated to the boot and fixed! Cheers. Stuart.