Morning all, thought I’d just post a ‘heads up’ to anyone thinking about refurbishing their wheel or using a non-MSport multi-function wheel to convert and refurbish non multi-function MSport one.
It wasn’t until I had an non-MSport and MSport wheel in my possession at the same time that I realised the trim is different.
The good news is, it’s only the trim for the bottom spoke of the wheel that is different, the side spoke covers are the same and interchangeable
On this basis, you can swap the trim and wiring from a Non-MSport multifunction wheel to an MSport non-multifunction wheel and vice-versa.
However; The bottom spoke cover on the MSport wheel is significantly shorter than on a non-MSport wheel and the two are not interchangeable :!:
So, if you have a non-MSport multifunction wheel already, but you want an MSport wheel you can swap over the side covers/buttons & wiring, from your current wheel.
It wasn’t until I had an non-MSport and MSport wheel in my possession at the same time that I realised the trim is different.
The good news is, it’s only the trim for the bottom spoke of the wheel that is different, the side spoke covers are the same and interchangeable

On this basis, you can swap the trim and wiring from a Non-MSport multifunction wheel to an MSport non-multifunction wheel and vice-versa.
However; The bottom spoke cover on the MSport wheel is significantly shorter than on a non-MSport wheel and the two are not interchangeable :!:
So, if you have a non-MSport multifunction wheel already, but you want an MSport wheel you can swap over the side covers/buttons & wiring, from your current wheel.