E85 airbag fault, B pillar module coding

[DartmoorZedFan]

Hi all.
I’m new to the forum.
Are there any Zed enthusiasts in Devon that can code airbag modules to the car?
My E85 has an airbag light on. My C110 code reader won’t reset it.
I had water in the drivers foot well last year which killed my yaw sensor. I replaced that myself and reset the code. And have fixed the water issue.
But a few months later the B pillar airbag module failed, I assume because of the water ingress.
On my C110 that module wouldn’t communicate anymore.
I’ve replaced it with a second hand one from eBay which now communicates but won’t reset. I think it needs coding to the car.
Is there anyone in Devon that has that capability? I’m happy to pay a bit of cash in hand.
Thanks.
Mark

 

[enuff_zed]

Hi all.
I’m new to the forum.
Are there any Zed enthusiasts in Devon that can code airbag modules to the car?
My E85 has an airbag light on. My C110 code reader won’t reset it.
I had water in the drivers foot well last year which killed my yaw sensor. I replaced that myself and reset the code. And have fixed the water issue.
But a few months later the B pillar airbag module failed, I assume because of the water ingress.
On my C110 that module wouldn’t communicate anymore.
I’ve replaced it with a second hand one from eBay which now communicates but won’t reset. I think it needs coding to the car.
Is there anyone in Devon that has that capability? I’m happy to pay a bit of cash in hand.
Thanks.
Mark

Hi Mark and welcome to the forum.
To clarify, following our fb discussion, in your case you will need someone with INPA, NCS Expert, WinKFP and Tool32 (Known collectively as the EIDEBAS suite) on a laptop, to code your new module with VIN and System Time.
Hopefully you can find someone closer to you than I am in Norfolk.

[ref]colb[/ref] is in Cardiff and may be able to help? Still not on your doorstep, but closer than me.

Best of luck, Martin