E63 (6 series) style 92 rims on a Z4

M

Mr.Shanahan

Member
Does anyone know if these wheels will go on a z4. I've seen the e65 rims on a z4 and the are a little wider. I'm almost of the position that there isn't much difference between em.

Series Model Size Use ET
6er E63+. 8,5x19 front ET 14
6er E63+ 9x19 back ET 18
7er E65+ 9x19 front ET 24
7er E65+ 10x19 back ET 24
 
Hi Mr Wilks. I spotted the pictures of his car on google images and thought they looked up my street. His post says his wheels were from the 7 series, so they are slightly wider but have a less sticky out offset.
 
Mr.Shanahan said:
Hi Mr Wilks. I spotted the pictures of his car on google images and thought they looked up my street. His post says his wheels were from the 7 series, so they are slightly wider but have a less sticky out offset.
Click to expand...

Well the et 14 fronts you are after will certainly push the boundaries but 30mm isn,t impossible when you look at the arch gap on some wheel,s .
Think you would struggle if it was lowered but sure marius would be screaming now that "of course they will f****in fit " :oops:
 
The 6er wheels are half inch narrower on front but stick out 10mm more and one inch narrower on the rear but stick out 6mm more. I'm hedging my bets that they will fit, but it's a push :?

Lowered on 40mm FKs. Narrow rubber and some praying required....
 
Broke the calculator out. Based on the rim width & difference in offset I think the front wheel will stick out 3.65mm more at the front and recess 6.7mm at the rear compared to the 7 series rims that were on Marius's car.

I recon I could stick 215/35/19 on the front and a 225/35/19 on the rear and get away with it. :thumbsup:
 
mr wilks said:
Have a play on here :thumbsup: http://www.rimsntires.com/specspro.jsp
Click to expand...

Nice. Seems that my calculations were pretty much correct. 5mm so only circa 1mm out on the fronts and correct on the rears. There might be enough room :?

imagejpg3.jpg


imagejpg4.jpg
 
You must log in or register to reply here.
Back
Top Bottom