e46 330i handbrake to 3.0si

[Panta Rhei]

Guys I ask for your help.
In the middle of a swap brakes from 135i, fronts are easy.
Now for the rear I need:
- e46 M3 brake discs
- e46 M3 dust covers
- 135i calipers
- 135i brake pads
This is straight on only to e46 330i and E85 is similar when it comes to suspension braking etc BUT rear handbrake on e85 3.0si is not the same as it is in e46 330i. Can I just swap items below and make my rear a la „330i"? I need it to be that way so I can fit set mentioned above.
https://forum.e46fanatics.com/showpost.php?p=16009864&postcount=39 = source of knowledge.
-
-
-

 

[Limonge]

I think that the rotors are very different, the pattern is all the same but the "hat" of the E85 is much deeper. Many of us have converted the front to 330i/d (325mm) but about the rear we're all stuck with 294mm.

 

[Panta Rhei]

I will swap the rear rotor from e46 m3, which fits to the rear 135i performance caliper which fits p&p and rear e46 m3 dust shield which also fits p&p.
I only need info bout handbrake shoes from 330i/d.

 

[bitmap]

Panta Rhei: hi, did you eventually find out if E46 rear handbrake assembly fits E85?
I'm planning to upgrade my rear brakes with 135i performance caliper, but I'm not sure if I can also do the handbreka swap.
Thanks!