Drivers Seat won’t go back .

[T8COH]

I’m trying to remove the drivers seat to get a part number for the YAW sensor but will only go partway back not enough to give access to the front bolts .
Feels like it hits a sudden stop but can’t see anything blocking the rails .

As usual lads any advice very much appreciated, if anyone will know it will be on this Forum .

Just to add cleaned the seats up just waiting on paint to arrive for the bolsters .

 

[j3nks79]

Have you tried in its highest position

 

[enuff_zed]

Have you tilted the back forward so it doesn’t hit the rear bulkhead?

 

[MikeyH]

Have you checked that there is nothing caught in the runners?

 

[enuff_zed]

If you look at the passenger side for reference you will see that in the outer rail, near the front, is a metal plate. If this is twisted it will stop the seat going fully back.
Regarding your yaw sensor, there are basically just two options, pre- or post-facelift.

 

[T8COH]

Thanks I’ve checked the usual runners etc will check for it being twisted though good shout .

Ah ok it’s post face lift I need then , will still fix the seat though need it out anyway for the YAW sensor and my leg position.

Cheers

 

[enuff_zed]

You need one of these then

Hope you have deep pockets :roll:

When you fit the new one, seal it in a poly bag with a sachet of silica gel for company.

 

[T8COH]

You need one of these then

Hope you have deep pockets :roll:

When you fit the new one, seal it in a poly bag with a sachet of silica gel for company.
Yaw Sensor.jpeg

I’m hoping to buy one from a sympathetic forum member like yourself , lol .

 

[enuff_zed]

You need one of these then

Hope you have deep pockets :roll:

When you fit the new one, seal it in a poly bag with a sachet of silica gel for company.
Yaw Sensor.jpeg

I’m hoping to buy one from a sympathetic forum member like yourself , lol .

I am sorry, but I sold the one I had.

 

[T8COH]

You need one of these then

Hope you have deep pockets :roll:

When you fit the new one, seal it in a poly bag with a sachet of silica gel for company.
Yaw Sensor.jpeg

I’m hoping to buy one from a sympathetic forum member like yourself , lol .

I am sorry, but I sold the one I had.

You can’t be the only sympathetic member though Enuff -Zed. I’m in no rush the cars more like a project so quite happy fiddling away on it .

 

[Mr_E85Bim]

You need one of these then

Hope you have deep pockets :roll:

When you fit the new one, seal it in a poly bag with a sachet of silica gel for company.
Yaw Sensor.jpeg

Are the pre face-lift version as expensive as well? Have a feeling mine is playing up...

Been getting this code. I changed the abs sensor today and its still happening, all three lights go off

 

[enuff_zed]

You need one of these then

Hope you have deep pockets :roll:

When you fit the new one, seal it in a poly bag with a sachet of silica gel for company.
Yaw Sensor.jpeg

Are the pre face-lift version as expensive as well? Have a feeling mine is playing up...

Been getting this code. I changed the abs sensor today and its still happening, all three lights go off

Prefacelift is nearer £30-40. Sorry I don’t have one but try the regulars on here

 

[Umfaan]

I have a few Prefacelift .Pm me your Whatsapp and I will send pic and price .

 

[T8COH]

I’ve ended up I could t wait any longer and paid £190 on eBay for one . Just waiting on its arrival .

 

[enuff_zed]

I’ve ended up I could t wait any longer and paid £190 on eBay for one . Just waiting on its arrival .

Jeez! For a prefacelift!!!! Send it back, you were robbed!!!

 

[T8COH]

No it’s a facelift .

 

[enuff_zed]

No it’s a facelift .

Oh yes sorry, confused who had what