bony_13 said:4" coaxial speakers in these is a very quick and worthwhile upgrade. Some good how-to's on here where you remove the doorcard and simply tap into the tweeter wiring.
Yes, there's an in-line capacitor acting as a passive high-pass filter in the tweeter wiring - it's close to the tweeter so you tap the signal prior to thisjohn-e89 said:The tweeter wire must carry full range signal then have a crossover or filter in the tweeter then right?
PerryGunn said:Yes, there's an in-line capacitor acting as a passive high-pass filter in the tweeter wiring - it's close to the tweeter so you tap the signal prior to thisjohn-e89 said:The tweeter wire must carry full range signal then have a crossover or filter in the tweeter then right?
k31ron said:really wish I had done this , I just replaced my speakers with better quality 2 ways (and a more powerful HU) but they still sound rubbish due to speaker location....cant face swapping them out again and then re-wiring for 3 way, may be next year.
Have you the pos an negative on the new speakers the right way round if not there'll be out of phase with the rest of the systemk31ron said:Hi Neil, i'm no expert I took audio shop recommendation on the speakers and installed them, its better then stock but it sounds "wrong" or muddy for lack of a better description with all the sound coming from the floor....if you have any tips on tuning it, gratefully received.
markplant said:Have you the pos an negative on the new speakers the right way round if not there'll be out of phase with the rest of the systemk31ron said:Hi Neil, i'm no expert I took audio shop recommendation on the speakers and installed them, its better then stock but it sounds "wrong" or muddy for lack of a better description with all the sound coming from the floor....if you have any tips on tuning it, gratefully received.