deleted

B21 said:
As a dyslexic / speed typer / speed reader its bound to be full of errors of various types..however hopefully it will be factually correct and where opinions are expressed the reflect the body politic..

As a Technical writer/Technical Author with some additional experience at proof-reading (speeling, continuity, grammar, correct tense, etc) I'm happy to help out if you need it.
 
B21 said:
enuff_zed said:
B21 said:
As a dyslexic / speed typer / speed reader its bound to be full of errors of various types..however hopefully it will be factually correct and where opinions are expressed the reflect the body politic..

As a Technical writer/Technical Author with some additional experience at proof-reading (speeling, continuity, grammar, correct tense, etc) I'm happy to help out if you need it.

Splendid….can I organise a conf call sometime to cross check / bounce ideas /issues pls? :? :?
Yes, and can I just say that you passed my test by not noticing the spelling of 'speeling'. :roll: :D
 
enuff_zed said:
B21 said:
enuff_zed said:
As a Technical writer/Technical Author with some additional experience at proof-reading (speeling, continuity, grammar, correct tense, etc) I'm happy to help out if you need it.

Splendid….can I organise a conf call sometime to cross check / bounce ideas /issues pls? :? :?
Yes, and can I just say that you passed my test by not noticing the spelling of 'speeling'. :roll: :D

Damn wish I had logged in earlier to catch that one 🤣

There are also online tools for doing a first pass at grammar etc and many are free, worth pumping your text through those before going to a human eye to pick out all the obvious stuff.
 
I haven’t even finished reading it, but this will be invaluable and it’s great that you’ve included the concept and principles of Hifi / Audio and how they relate to the various installations. Well done Peter !
 
wow, great document, really appreciate the effort here.

It has prompted some questions (not totally related) which i will put in a new thread. :thumbsup:
 
Not sure whether you have already thought of/already done this......but if you type the subject of this thread into ChatGPT it will give you about 650 words of headings and ideas content to provide a framework for this section of the guide. Obviously this can be repeated for other sections and it can then be fleshed out with other content as you wish......just a thought.
 
This is a really useful guide, thank you. It has motivated me to take my plans a step further.

I have an e89 with the base audio system (6 speakers) on a CIC headunit with navigation (though the navigation is unusable for reasons I won't go into - I've added Mr12Volt already so doesn't bother me).

My plan was to keep things simple and only replace the existing speakers + add tweeters, as per Dave's youtube channel. But I don't think I can resist adding an amplifier now... Will the Vibe 65.4 make a decent difference? If yes - is that a much easier option (without compromising too much on sound quality) than trying to upgrade the headunit to 677? Would the Vibe still give me the option to add sub-woofers later in a sensible way?

I understand the concepts, but a little stuck on the details on what's actually involved practically with each option, so any pointers really appreciated! Thanks!
 
Personally..having had 676 and 677 in my E89s I think you can do a lot better these days…
Thanks - I have sensitive ears and lots of long drives to do, so this rules out 677 for me.

the jump to a DSP solution is a major technical one
And the Vibe 65.4 does not provide DSP, right? The model they have that looks like it does is 3 times the price - which I'm happy to pay if it makes a big difference. Is this likely to be a good option or have people found good results with something else at around this price point?

imho a good power feed to some decent woofers in the footwells would give very good results…
Which sounds like it would be true of either a basic amp and a DSP amp (assuming my headunit is coded to HiFi), leaving both options open. But, if I've understood your guide correctly, a DSP will do a better job of getting an optimised signal to the woofers. Even better than adjusting the EQ on the Mr12Volt, which will be providing 99% of my audio input?
 
Thanks. Do you know if the front left speakers (woofer and mid) are wired in series?

I have installed new speakers and the amp but the front left channel isn't working. I suspect I have a loose connection to the new Focal woofer in left footwell, but that only makes sense if losing that one connection would affect the left midrange as well.

The 3 channels that are working now sound great though! Amazing for £350 total. That new woofer (the working front right one) with the amp made the biggest different, as you suggested. I also added tweeters on all 4 mids and this has made a difference even at the rear once the amp was added. For an extra £20 and 3 minutes of drilling it was worth it.

Thanks again.
 
Oh dear. I better do some more fiddling then!

In case helpful to anyone, attached are photos of the holes I drilled to add tweeters to the rear mids on the base system - it was super easy using the circular drill bit at a slow speed and holds it quite snugly.
 

Attachments

  • 20241226_162538.jpg
    20241226_162538.jpg
    279.6 KB · Views: 2,172
  • 20241226_162416.jpg
    20241226_162416.jpg
    63.2 KB · Views: 2,168
  • 20241226_162424.jpg
    20241226_162424.jpg
    243.4 KB · Views: 2,169
  • 20241226_162433.jpg
    20241226_162433.jpg
    167.8 KB · Views: 2,170
Appreciate the document thank you.

I’ve just recently bought my e89 35i. Bizarrely I have the cutouts and cover for the subs behind the seats but they are missing. Also the rear mid range are also missing.

Everything I’ve read and watched I should at least have basic 6 speaker system as standard but I think a previous owner may have been a devious and removed some.

I’m going to have a proper look tomorrow to check if the wiring is still in place to prove/disprove my theory.
Unless the wiring is installed for all speakers as standard regardless of which option is selected when the car was purchased brand new? Does anyone know this?

If not and wiring doesn’t exist is anyone aware of any guides to install speakers plus wiring. I’ve not been able to find anything.

Appreciate any help.
 
Peter explains everything pretty well in the link in his 1st post, I suspect a previous owner has at some point upgraded the speakers and then removed them without re fitting the factory ones, if you run your VIN number through a decoding site it should tell you which system was fitted from new.
 
Thank you for the link. I’ve decoded on that site but can’t tell which system I have. Presumably it is S609 and base then?

S609 Navigation System Professional
S612 BMW Assist
S615 Extended BMW Online Information
S616 BMW Online
S633 Business Mobile Phone Preparation With Bluetooth Interface
S694 Provisions For BMW 6 CD Changer
S698 Area-Code 2 For DVD
S6AA BMW TeleServices
S6AB Control, Teleservices
S6FL USB/Audio Interface
 
Allstars said:
Thank you for the link. I’ve decoded on that site but can’t tell which system I have. Presumably it is S609 and base then?

S609 Navigation System Professional
S612 BMW Assist
S615 Extended BMW Online Information
S616 BMW Online
S633 Business Mobile Phone Preparation With Bluetooth Interface
S694 Provisions For BMW 6 CD Changer
S698 Area-Code 2 For DVD
S6AA BMW TeleServices
S6AB Control, Teleservices
S6FL USB/Audio Interface

Yes base system, if a previous owner had upgraded the speakers then perhaps the the wiring should be there for the subs, but presumably any amplifier that was fitted will have also been removed, there should be the original wires for the missing speakers below the seatbelt.
 
Back
Top Bottom