Dash warning light for bulb out

Bodyboarder

Active member
Hi all … am I correct in thinking that the small LED side lights I fitted the other day have brought the dash wanting light on ? And if so , anybody know of a set that don’t ?

Thank you
 

Attachments

  • IMG_9286.jpeg
    IMG_9286.jpeg
    125.5 KB · Views: 245
j3nks79 said:
Basically you need canbus friendly ones.
The resistance on some leds will put the bulb warning on.

It’s odd though , as I used the same bulbs for the rear number plate lights , they have been in a few weeks and dash warning light
 
Using scanner 1.4 I can see a large table showing all the lights and tick boxes for various checks on them.
Usually I find the numberplate lights are unticked and therefore not checked.
If you found someone with that software they should be able to remove the check on the sidelight bulbs too.
 
enuff_zed said:
Using scanner 1.4 I can see a large table showing all the lights and tick boxes for various checks on them.
Usually I find the numberplate lights are unticked and therefore not checked.
If you found someone with that software they should be able to remove the check on the sidelight bulbs too.

Ah ok .. does sound like the side light LED’s then . If I remove them and put the standard ones back in , will the dash light go out ?

Thanks :thumbsup:
 
Bodyboarder said:
enuff_zed said:
Using scanner 1.4 I can see a large table showing all the lights and tick boxes for various checks on them.
Usually I find the numberplate lights are unticked and therefore not checked.
If you found someone with that software they should be able to remove the check on the sidelight bulbs too.

Ah ok .. does sound like the side light LED’s then . If I remove them and put the standard ones back in , will the dash light go out ?

Thanks :thumbsup:
Yes it should do.
 
Back
Top Bottom