Cup Holder Blanks Removal

[srhutch]

I need to remove the blanks where the cup holders would be to swap my dash panel. From what I ave read the just pull off.

What's the best way to do this without marking anything.

Also need to decide whether it's worth getting cup holders, not that I'll ever use them.

 

[Darren Slone]

They just pop off, I put a screwdriver behind one side and levered it of, really easy doesn't need much force at all

 

[srhutch]

Thanks for that

I'll put a bit of tape on thing to stop any marking, not that I'm going all Andysat or anything.

 

[spareone3]

A credit card, (old one) can work well on such trim.

 

[Bing]

Thanks for that

I'll put a bit of tape on thing to stop any marking, not that I'm going all Andysat or anything.

 

[spareone3]

A credit card, (old one) can work well on such trim.

Poke corner along the short edge/side and prize open. It'll pop-off easy,

 

[pvr]

Why put a cup holder in there that would only rattle ...

 

[andysat]

Thanks for that

I'll put a bit of tape on thing to stop any marking, not that I'm going all Andysat or anything.

I seem to be well known on here -i appear in so many other people's threads

 

[srhutch]

Why put a cup holder in there that would only rattle ...

No it's to swap by dash trim over.

 

[srhutch]

Thanks for that

I'll put a bit of tape on thing to stop any marking, not that I'm going all Andysat or anything.

I seem to be well known on here -i appear in so many other people's threads