Cubby door removal

M

Mowflow

Senior member
 Glasgow
Could anyone tell me how to remove the rear centre cubby door please?

Searched all the threads about removing interior parts as I stripped mine for wrapping yesterday. A few mention removing the cubby door but nobody says how it's done. I actually managed to get everything out without removing it but the 2 torx bolts under the bottom of the door are a mare with it still fitted.

I also can't figure out how or rather where to fit the light switch for inside the cubby. I unclipped it without noting where it had been fitted :headbang:
 
2 screws in hinge, remove those and then just pull off.

I have posted many threads on this removal, satnav retrofit one as well as intravee fitting from memory.
 
Thank you, had those screws out but couldn't see how to get it off. I'll have another go now I know this how it's done.

Searched a few terms but got so many results I just couldn't go through them all. Thanks for reposting the info.
 
Mowflow said:
Thank you, had those screws out but couldn't see how to get it off. I'll have another go now I know this how it's done.

Searched a few terms but got so many results I just couldn't go through them all. Thanks for reposting the info.
Click to expand...
You need to apply a bit of elbow grease... mine came off with a bit of persuasion! Thought I was going to break it at first though... :oops:
 
The screws expand a piece of plastic so once they have been removed there is nothin to stop the lid being pulled off. Refitting takes a bit of pressure as well.
 
You must log in or register to reply here.
Back
Top Bottom