Cruise control retrofit on a 2005 E85 Z4 2.0

A

antony74

Member
Hello everyone!!!
This is my first thread in this forum and i am so glad to be here and to be finally able to share my joy with you for my 2005 Z4 2.0 that i just bought!!!!
I have a question though for a matter that is really important to me and unfortunately find myself in the dark for: is it possible to retrofit cruise control to my car and if so which parts will i need and how will i be able to do it myself? Unfortunately it is the only option that i miss the most in my car!!!
Thank you very much in advance!!!
 
Yes you can retrofit cruise control, you will need a wiring loom as well as the stork unlike on older models.

Part numbers are

CC wiring 61 12 0 411 248
CC Stork 61 31 6 940 989

Welcome by the way and dont forget to post some pics :poke:
 
and a dremel to cut out the lower steering cowl (or you can buy that from the dealer too)..

and welcome :thumbsup:
 
Hi everyone!!!
I bought the cc retrofit kit and have already done the easy part by installing the stalk and lower steering wheel column cover but when i go through the instructions for the wiring installation i go crazy!!! I have all the wiring required because the kit was all inclusive but the big question is how will manage that ? Since we are on as retrofit discussion i would really appreciate some more help please: i installed a stalk that has the on board computer switch because it wasnt already on the car but it doesnt seem to work. I believe that a visit to a dealer with a programming device will solve the matter but could it be that additional wiring is needed as well?
Thank you again!!!
 
You must log in or register to reply here.
Back
Top Bottom