I've enabled "KOMFORTSCHLIESSUNG_FB" - comfort closing with remote control through NCS Expert and it's working fine. However I have to hold lock to close the roof, release and then hold lock again to put the windows up. Is there some code I am missing somewhere that I can just hold lock and the roof and windows both go up in one?
Comfort Close Coding
- Thread starter X-S-Z
- Start date
Marius said:you can try those
gm5 module
cvm module
Well I tried the GM5 module first and this was what I looked like before I made any changes:
I enabled the convertible function and nothing (as far as I could tell) changed. I then disabled the open windows when opening top function and then the windows only moved on their own and the top didn't. I then swapped them around and still no change. I've returned to what they were originally convertible function = disabled, open windows = enabled.
I then tried the CVM which looked like this before I made any changes:
I then disabled wait for windows and tried coding. I got this error which I've no idea what its referring too. Time to google search! Do your settings like much like mine?
i will check my setting tomorrow. The error message usually comes when you switch the ignition off ,try again it should be fine .
Somewhere is another option ,where you can choose how much windows will open when you opening the roof ( full ,half way or none ) ,but i can't find it right now .
Somewhere is another option ,where you can choose how much windows will open when you opening the roof ( full ,half way or none ) ,but i can't find it right now .
Marius said:
Tried again in ignition switch position 1 and 2 but the same error each time. That setting sounds like the one I am needing. They're definitely set to full for open and none to close. I haven't come across this setting anywhere though. It'd be great if you could check yours.
