Colour of Red M seats or Scuffmaster/Gliptone Liquid Leather

FR08MEE

Member
As above does anyone know the colour code of the M seats or the actual colour for the Scuffmaster as I can't find it on their site and want to restore my seats or tidy them up at least.

Thanks in advance.
 
FR08MEE said:
As above does anyone know the colour code of the M seats or the actual colour for the Scuffmaster as I can't find it on their site and want to restore my seats or tidy them up at least. Thanks in advance.

If you don't get the code then you can do what I did when I re-furbed the M3.

Cut off a piece of leather from a hidden part of the seat, send it to Liquid Leather, and they'll send you a perfect match. :thumbsup:

Hope that helps.
 
I went into this to some tune when i had mine - with Liquid leather - they reckon there are at least 4 Imola leathers so the only way is a swab of leather and they will match ( note M3 Imola is probably quite a different shade as the car is assembled in Europe whereas the Z4M in South Carolina)

the best location i found was at the back base of the seat if you feel down you come across a black clip which has the back of the seat under slight tension, beyond this clip there is a food couple of inches of spare leather.

note he needs quite a bit to get a match - he sent my first "sample back" saying it was too small to get a colour match from .
 
ZermattV said:
I went into this to some tune when i had mine - with Liquid leather - they reckon there are at least 4 Imola leathers so the only way is a swab of leather and they will match ( note M3 Imola is probably quite a different shade as the car is assembled in Europe whereas the Z4M in South Carolina)

the best location i found was at the back base of the seat if you feel down you come across a black clip which has the back of the seat under slight tension, beyond this clip there is a food couple of inches of spare leather.

note he needs quite a bit to get a match - he sent my first "sample back" saying it was too small to get a colour match from .

+1 - It'll be worth it in the end :)
 
Thank you for all the replies.

Once Iv looked into this further I'll report back or try and get it listed on their site to help anyone else who is thinking of doing this :)
 
I got the Imola set with toners. I'm guessing no matter which one you get you might need to adjust.

I applied mine with an airbrush. Need to add another coat or two but I'm keen to ensure it soaks into the leather rather than layering on top which looks shite.
 
from the Youtube of PawnSacrifice from the forum

Seat refurbishment using airbrush

https://www.youtube.com/watch?v=MTZpRiLq_TA&index=14&list=PLMW54NEwELeJu21DtiLiBKHLx_ABscb_7
 
Back
Top Bottom