Coding/Clearing Error Codes etc

nfarmer

Active member
 Worcestershire
A little while ago mac27040 suggested a new forum to cover coding and clearing warning lights etc but so far nothing seems to have done but there are regular queries on here about BMW software etc.

As I purchased the BM Technic kit I have done a little clearing error codes, service interval re-sets etc but have never had the courage to use NCS Expert. I have a number of "how to's" available and am happy to share if they can be hosted some where where they can be easily downloaded by forum members. Please note they are far from being all my work as they are mainly based on "how to's" published by BM Technics.

I cannot guarantee they will all work satisfactorily and must be used at your own risk. There is no guarantee of success and if anything goes wrong I am not responsible.

They are as follows:

BMW-Technical-Acronyms.pdf

DIS
DIS_manual.pdf
GT1-Manual.pdf
How To Guide Reading Clearing Fault Codes and Test Plans with DIS.pdf
Testing your VANOS unit with DIS.pdf

INPA
Clearing an airbag light with inpa.pdf
Reading Engine Fault Codes using Inpa
Reseting Service Interval Indicators using Inpa.pdf

NCS Expert
Changing Vehicle Order in CAS.pdf
Code for opening and closing sunroof.pdf
Detailed NCS Expert.pdf
Dummies Guide to Basic coding with NCS Expert.pdf
Enabling M Track Mode.pdf
Fixing RAD error.pdf
NCS DIY.pdf
NCS Expert Codes E85.pdf
NCS Expert Tutorial.pdf
NSC Expert Codes BMW Z4.pdf
Quick reference for NCS Expert.pdf

SSS Progman
How To Guide Coding Car Settings with SSS Progman.pdf
CKM Settings E85.pdf

I also have the following "How to's" for retrofitting some enhancements:

Alpine CD Changer Installation.pdf
AUX Input install.pdf
CD Changer Retrofit.pdf
Retro Fit Pass Airbag Deactivation Kit.pdf
Xenon Retrofit.pdf

While I would be happy to send these by email on request it would be better if someone could offer to host them on their web site

Regards

Norman
 
Back
Top Bottom