Clearout and few parts ive kept/collected

[RESTORATION PARTS]

heating element 6915731 - £50 posted

oddments tray ejection box with cover £150

oddments tray ejection box with cover £90 (modified)

Z4 M HD Clutch and Flywheel Kit (Sachs and jb) lightweight flywheel for z4m s54 - £450 posted
https://www.turnermotorsport.com/p-878-z4-m-hd-clutch-and-flywheel-kit/

rear bumper in Schwartz black I believe will need painting pdc with ecu module and wiring and 3x pdc sensors (missing 1x) £70 collected

SI front lower grille 2006 onwards - £50 posted

several sets of side skirts for a pair £50 collected
(jet Schwartz sapphire black Monaco Montego blue alpine white space grey)


https://ibb.co/sy69gV4
https://ibb.co/W5mtQqh
https://ibb.co/6FRy2gb
https://ibb.co/tqFGycT
https://ibb.co/yswBSKK
https://ibb.co/2vShkZm
https://ibb.co/PgYhK3J
https://ibb.co/9V9tYJD
https://ibb.co/DtJ6DzN
https://ibb.co/DwKsK2D
https://ibb.co/JFrxL2X
https://ibb.co/bKfzcdm
https://ibb.co/t4VvDRK
https://ibb.co/r5dGZ7C
https://ibb.co/ySTWs3f
https://ibb.co/cDcsdxC
https://ibb.co/x5v0XR0
https://ibb.co/ZxJyx62
https://ibb.co/JCQqypk
https://ibb.co/LzQL1qk
https://ibb.co/B34RDM1
https://ibb.co/tp0rt9c
https://ibb.co/16GR5kL
https://ibb.co/kH5fqWb
https://ibb.co/xqMy771
https://ibb.co/vs03y36
https://ibb.co/zPC8wZy
https://ibb.co/HgLz26p
https://ibb.co/qRPdmgz
https://ibb.co/tKzYRYb
https://ibb.co/dbkHzxC

not sure what ive done to these images been a while since i posted

 

[TomK]

Z4 M HD Clutch and Flywheel Kit (Sachs and jb) lightweight flywheel for z4m s54 - £450 posted
https://www.turnermotorsport.com/p-878-z4-m-hd-clutch-and-flywheel-kit/

Quite interested in this. Can you confirm to me the part number of the pressure plate please as the turners kit on their website is listing the Z3M one when it should be the e46m3 one for the Z4M. The Z4M also has it's own JB part number, it is not the Z3 part needed and which is listed in the kit.

Thanks

 

[RESTORATION PARTS]

Hi mate pressure plate has TYP MF 240 but in regards to fitment all I know is it’s a kit they put together for the z4m other then that I don’t know

Should also take this opportunity to say I comes with a bag of bits plates and 2 release bearings etc that is not photoed

 

[TomK]

Ok cheers, will leave it.
GLWTS

 

[Scooby216]

Hi mate, where's collection from?

 

[RESTORATION PARTS]

Newcastle bud

 

[Scooby216]

Newcastle bud

Thanks mate,
Do you have more details on the clutch/flywheel assembly? Age and approximate mileage please?
Cheers,
Scooby.

 

[RESTORATION PARTS]

Was bought off eBay a lot of years ago now could be about 5 years ago for my z4m coupe I had at the time and I’ve never fitted/used it myself …was advertised as less than 1000 miles but I would have to find the original receipt it came.

 

[Scooby216]

Oh mate.... That's a shame. Bought second hand and not having ever installed makes me worried about being the correct part. I bought a LW Flywheel and Clutch assembly about a year ago under the same circumstances, and they were wrong. Gonna have to give it a miss. Sorry mate. GLWS.

 

[RESTORATION PARTS]

Bump

 

[Doddsy]

I’m just in Newcastle.

Is it Jason? You don’t happen to have an Offside front hub assembly in alright condition that would fit a 2005 2.2 would you?

Previous owner snapped the lower shocker bolt in the bloody thing :rofl:

Cheers

Doddsy

 

[RESTORATION PARTS]

Yes I do buddy I have a box of them if you want to pop along … send me a pm?

 

[Doddsy]

Yes I do buddy I have a box of them if you want to pop along … send me a pm?

Done, Cheers

 

[Gebbly]

Hi [ref]RESTORATION PARTS[/ref], is the "oddments tray ejection box" the little "glasses box" with the flip down lid in the ceiling? If so what is the "modified" one and do you still have them for sale please?

 

[Doddsy]

Thanks for the part mate