Cleaning Exterior Black Trim

A

AndyS

Member
 Gloucestershire
I'm sure this must have been discussed before but I couldn't find anything with search as I wasn't really sure what to search for!
What are people's recommendations for cleaning the black exterior trim, say round the wing mirrors, as invariably I end up with white polish residue on there and struggle to remove it.
I'm sure there's something out there to do the job, I just don't know what! :)
 
Whatever you do avoid getting any form of wax (or polish) on in the first place as it's very hard to remove.

There are loads of 'back to black' and exterior trim sprays that will do the job quickly and easily. Take a look in Halfords.
 
I realise not getting polish on there in the first place is the preferred method but it's sure to happen sooner or later.
I have a 'Back to Black' (Can't remember which) product at the moment which doesn't really do anything much so was after recommendations for products which work.
Sounds like I could be trying the Autoglym bumper gel next.
Will also have a look on detailingworld.co.uk
Thanks for your help so far
 
Chemical Guys New Look Trim Gel :thumbsup: http://www.cleanyourcar.co.uk/wheels-and-tyres/chemical-guys-new-look-trim-gel/prod_143.html
 
Have used Turtle Wax Ice on black plastic and no problems,no white residue and gives a nice shiney finish.
 
The best thing is to get a product that actually removes the stain, not covers it.

By far the best residue remover I have found is a rubber (eraser). Get a nice soft one and rub the plastic - the white residue will rub off 8)

Follow up with a tiny drop of ground-nut oil (available at supermarkets) or peanut butter (messy but does the same) on a soft cloth to get of any remaining stains and restore the black plastic.

Two great tips I picked up from Detailing World that amaze everyone I have shown.

HTH
Dave
 
daveg said:
The best thing is to get a product that actually removes the stain, not covers it.

By far the best residue remover I have found is a rubber (eraser). Get a nice soft one and rub the plastic - the white residue will rub off 8)

Follow up with a tiny drop of ground-nut oil (available at supermarkets) or peanut butter (messy but does the same) on a soft cloth to get of any remaining stains and restore the black plastic.

Two great tips I picked up from Detailing World that amaze everyone I have shown.

HTH
Dave
Click to expand...

Have to agree i use the CGNLTG as a dressing not to remove staines.
 
daveg said:
The best thing is to get a product that actually removes the stain, not covers it.

By far the best residue remover I have found is a rubber (eraser). Get a nice soft one and rub the plastic - the white residue will rub off 8)

Follow up with a tiny drop of ground-nut oil (available at supermarkets) or peanut butter (messy but does the same) on a soft cloth to get of any remaining stains and restore the black plastic.

Two great tips I picked up from Detailing World that amaze everyone I have shown.

HTH
Dave
Click to expand...

Thanks Dave. This is why this Forum is so great when people share info like this. :thumbsup:
 
Thanks for all the advice, some great tips there.
Will definitely give the rubber a go.
I've also bought some Autoglym Bumper Gel as I needed it quickly and could get it locally.
Fingers crossed it'll do the job.
I'm not fanatical, I just like the car to look clean and tidy.

Thanks again for your help.
 
303 Aerospace Protectent is excellent: http://www.polishedbliss.co.uk/acatalog/303-aerospace-protectant-cat17.html

Bradders :)
 
AndyS said:
Thanks for all the advice, some great tips there.
Will definitely give the rubber a go.
I've also bought some Autoglym Bumper Gel as I needed it quickly and could get it locally.
Fingers crossed it'll do the job.
I'm not fanatical, I just like the car to look clean and tidy.

Thanks again for your help.
Click to expand...

I used AG Bumper Gel for years its good stuff i now use CNLTG
 
Bradders said:
303 Aerospace Protectent is excellent: http://www.polishedbliss.co.uk/acatalog/303-aerospace-protectant-cat17.html

Bradders :)
Click to expand...

Yes, I've also used this on all the black trim in the engine bay. :thumbsup: Terrific stuff.
 
Another vote for 303. I've been using this on the tubes on my boat and plastic car parts for a couple of years now with good results. I have a couple of friends that use it on the canvas spray dogers/hoods on their boats with good results. Has anybody considered trying it on their roof, the material has a very similar feel to it, I'm too scared to give it a try! :|
 
Markyboy said:
Another vote for 303. I've been using this on the tubes on my boat and plastic car parts for a couple of years now with good results. I have a couple of friends that use it on the canvas spray dogers/hoods on their boats with good results. Has anybody considered trying it on their roof, the material has a very similar feel to it, I'm too scared to give it a try! :|
Click to expand...


Yes you can use on soft tops.

http://www.cleanyourcar.co.uk/engine-amp-exterior/303-fabric/vinyl-convertable-cleaner/prod_487.html
 
I use the Meguiars Gold Class trim stuff, brings them up a treat and is pretty durable - but I try not to get residue on there in the first place!
 
You must log in or register to reply here.
Back
Top Bottom