Centre console screw covers

S

synthedup

Senior member
 Rotherham
Hi guys,

I have three of these that I 3D printed before selling the z4.

Will need a light sand prior to a bit of satin black paint.

£6 delivered?

If there is a demand for these I can get more. I could also prep them and paint them ready.

Cheers
Simon
 

Attachments

  • E10A00A0-F82A-4868-A628-07254459A61A.jpeg
    E10A00A0-F82A-4868-A628-07254459A61A.jpeg
    270.6 KB · Views: 1,335
  • 4FC2658B-59CD-46BD-9AA0-9B2BA7F7E02E.jpeg
    4FC2658B-59CD-46BD-9AA0-9B2BA7F7E02E.jpeg
    271 KB · Views: 1,335
I would be interested in a couple of them, got some 3D printed ones installed in the front but need two for the rear of the console. Could they be printed in black already as the ones I have are black and saves painting?
 
Reading this got me thinking :roll: just how much can a blank cap be for the original :oops: jaheeeeeez :cry: these cost more than Oem wheel centres :o nuts
£17 for 1 single , £30 for a pair :o
 
I am going to find something on the net that is a match ............weekend task.Example attached....... and mere pennies

ebay.co.uk/itm/Hole-Plugs-Plastic-Blanking-Masking-Finishing-Inserts-Various-Sizes-Black/222268620243?_trkparms=aid%3D1110012%26algo%3DSPLICE.SOIPOST%26ao%3D1%26asc%3D225114%26meid%3D0c8e44f122db41548916177b4ffec589%26pid%3D100008%26rk%3D2%26rkt%3D2%26mehot%3Dpp%26sd%3D221828614385%26itm%3D222268620243%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DPromotedSellersOtherItemsV2%26brand%3DUnbranded&_trksid=p2047675.c100008.m2219
 
synthedup said:
Hi guys,

I have three of these that I 3D printed before selling the z4.

Will need a light sand prior to a bit of satin black paint.

£6 delivered?

If there is a demand for these I can get more. I could also prep them and paint them ready.

Cheers
Simon
Click to expand...

I think there would be a high demand for these. I would happily pay around the £10 mark for 4 of them if you were to make some more?.
 
I’ve also been 3D printing these myself - although currently my printers are going 24/7 printing out PPE for local keyworkers. Once this huge mess (covid-19) returns to some normalcy I’ll be printing these again myself for people :)

STL file for mine can be found here for those with printers: https://www.thingiverse.com/thing:4247901
 
mr wilks said:
Reading this got me thinking :roll: just how much can a blank cap be for the original :oops: jaheeeeeez :cry: these cost more than Oem wheel centres :o nuts
£17 for 1 single , £30 for a pair :o
Click to expand...

I paid £18 plus postage for a single one a couple of weeks ago. The hole was annoying me, but the cost of a single cover made me pull a funny face before I ordered it...! :-?
 
IAmOrion said:
I’ve also been 3D printing these myself - although currently my printers are going 24/7 printing out PPE for local keyworkers. Once this huge mess (covid-19) returns to some normalcy I’ll be printing these again myself for people :)
Click to expand...

Unbelievable...you'd think you'd get your priorities in the right order.... :rofl:
 
IAmOrion said:
I’ve also been 3D printing these myself - although currently my printers are going 24/7 printing out PPE for local keyworkers. Once this huge mess (covid-19) returns to some normalcy I’ll be printing these again myself for people :)

STL file for mine can be found here for those with printers: https://www.thingiverse.com/thing:4247901
Click to expand...

I'd quite happily pay you for 6 of these. I'm just fitting my centre console after a retrim and no matter how careful I was 2 of them broke.
 
I am interested too.

I did get some 3D printed ones on ebay a while back but they didn't fit great to be honest. Whats the fitment like on these?
 
bearded_ed said:
I am interested too.

I did get some 3D printed ones on ebay a while back but they didn't fit great to be honest. Whats the fitment like on these?
Click to expand...

Personally, the "v4" of my files I posted the other day are pretty good.
 
You must log in or register to reply here.
Back
Top Bottom