Can't community with Airbag computer + energy saving mode.

[3.0si06]

Have an air-bag sensor on dash.

Couldn't communicate get anything from the Air-bag computer.

Also, 1-code on Energy Saving Mode activated -- AC fan is barely blowing.

Any ideas on these?

 

[enuff_zed]

Have an air-bag sensor on dash.

Couldn't communicate get anything from the Air-bag computer.

Also, 1-code on Energy Saving Mode activated -- AC fan is barely blowing.

Any ideas on these?

Probably not related but potentially both caused by a flat or unhealthy battery.

Energy saving = transport mode. You also won't have aircon or heated rear window. Easily reset with the right software. More expensive software can actually delete it so it doesn't happen again.
Where are you? Hopefully someone nearby can assist.

Worth trying a better scanner on the airbag light first. If there are several modules that the scanner can't talk to it points to an issue with one of the modules on the k-bus. Not worth getting too excited until you have a more comprehensive scan carried out with INPA, Scanner 1.4 or similar.

 

[3.0si06]

I'm in Wisconsin, the North Eastern part of the state aka Fox Valley

I'll look into that K-bus. Good call!

 

[enuff_zed]

I'm in Wisconsin, the North Eastern part of the state aka Fox Valley

I'll look into that K-bus. Good call!

Ah ok. This forum is predominantly UK based but always happy to help