Camber Bolt

[markz4coupe]

I've been asked to buy a replacement camber bolt set as mine is on the way out, so I've purchased a bolt, nut and the funny shaped washer.

Question is, does anyone know whether I need one or two washers for a single bolt?

Thanks!

 

[bcworkz]

One, the eccentric washer opposite the nut is built into the bolt head.

 

[markz4coupe]

Perfect thanks!

 

[fixit man]

One, the eccentric washer opposite the nut is built into the bolt head.

I presume this bolt is on the rear...as the front is a different set up ?

 

[markz4coupe]

Yup this is on the rear. I guess the front is more complicated?

 

[fixit man]

I don't think it's supposed to be adjustable on the front, but you can adjust it by removing a locating pin on the top of the MacPherson strut and then it can be moved in or out ..but only a limited amount !!

 

[markz4coupe]

Ah I see. I was just having mine aligned and the rear right bolt was excessively worn, possibly as a result of the spring shearing not that long ago.