Breaking: 2.0 57 Ruby Black

bigwinn

Elite
 Lincoln UK
Site Supporter
Well that didn't work out as planned

Please keep it on the thread as per rules if you wish to purchase parts- but be aware its advertised elsewhere.

I can post, courier or arrange drop off of most parts. Photos if needed I can send.

Being open and honest:

- I expect this to be a resto car but its not viable in a number of ways
- Its been a Scottish car for most of its life so is a bit frilly to say the least

Nevertheless there are a number of good points for salvage:

Ruby Black code S23

Drivers door £60
Bonnet £70
Front bumper (excludes grilles/badge) but does include fogs, slight paint damage but otherwise good £150
Rear bumper with PDC £80
Mirrors x2 5 wire £80
Boot lid £60
Side skirts £60

Headlights- halogens with clear indicators no obvious damage to tabs £350
Clear side indicators £35
Rear lights sold

Facelift yaw sensor £130
Passenger airbag switch and dashboard light £40
Black central vents £40
Black radio (business cd) £40
Aux panel and cable £35
Dimming rearview mirror £40
Msport MSFW steering wheel £190

L&R lower splash guards £80

Roof £200 inc hoses
Roof motor £160

Alloys- gone
Seats- gone
Front wings- toast
Rear wings- same

Anything engine wise will probably go with the car-

I may remove the aux heater, alternator and airbox/maf

Any other parts needed shout up
 
[ref]Gee-Lanty[/ref], could be your source for the heater vent you needed?
[ref]FunkyGBrown[/ref], what about the AC condenser/radiator?
 
bigwinn said:
enuff_zed said:
FunkyGBrown said:
I'd be interested in the air conditioning condenser? 8)
Best you hope Stuart is less clumsy than me!
As I discovered, they don't bounce. :headbang:

Are they different to the m54 ones?
Realoem says exactly the same for all E85 and E86, including 'M'. (Pt No. 64536914033)
 
Hey bigwinn I’ll definitely have the central vent!

Do you have the circular door knob trims available as well by any chance?
 
Gee-Lanty said:
Hey bigwinn I’ll definitely have the central vent!

Do you have the circular door knob trims available as well by any chance?

The ones that sit in the recessed handle? Yeah
 
bigwinn said:
Gee-Lanty said:
Hey bigwinn I’ll definitely have the central vent!

Do you have the circular door knob trims available as well by any chance?

The ones that sit in the recessed handle? Yeah
Stuart, I think he's after the bit of trim that sits round the knob at the top rear of the door?
 
bigwinn said:
Gee-Lanty said:
Hey bigwinn I’ll definitely have the central vent!

Do you have the circular door knob trims available as well by any chance?

The ones that sit in the recessed handle? Yeah

Not the ones behind the door handle if that’s what you mean...it’s the trim around the door lock knobs I’m after.

These…B6B2CF39-888B-4B8D-A155-6102B60692A4.jpeg
 
[ref]Gee-Lanty[/ref], [ref]bigwinn[/ref], there were one or two smaller items that Levent had asked me for, but as they ideally need to go to Cyprus it would make more sense for Stuart to supply them all if possible and post in one package? The MDD module definitely, think there may have been something else? If not, and there's no rush, we may be able to meet up and put everything in one box, but the first solution would be simpler?
 
enuff_zed said:
[ref]Gee-Lanty[/ref], [ref]bigwinn[/ref], there were one or two smaller items that Levent had asked me for, but as they ideally need to go to Cyprus it would make more sense for Stuart to supply them all if possible and post in one package? The MDD module definitely, think there may have been something else? If not, and there's no rush, we may be able to meet up and put everything in one box, but the first solution would be simpler?

Makes sense

Let me know I can cover the mdd, these grommets and anything else

Martin you ok with that?
 
bigwinn said:
enuff_zed said:
[ref]Gee-Lanty[/ref], [ref]bigwinn[/ref], there were one or two smaller items that Levent had asked me for, but as they ideally need to go to Cyprus it would make more sense for Stuart to supply them all if possible and post in one package? The MDD module definitely, think there may have been something else? If not, and there's no rush, we may be able to meet up and put everything in one box, but the first solution would be simpler?

Makes sense

Let me know I can cover the mdd, these grommets and anything else

Martin you ok with that?
Yup, not worth fighting over a few small parts if it saves Levent a wedge on postage.
 
Sounds good guys! 😀

So it’s the center vent, door lock knob trims and mdd. I’ll have a little inspection this afternoon and see if there’s anything else I might need. Will get back to you this evening.
 
Gee-Lanty said:
Sounds good guys! 😀

So it’s the center vent, door lock knob trims and mdd. I’ll have a little inspection this afternoon and see if there’s anything else I might need. Will get back to you this evening.

All picked ready
 
Back
Top Bottom