Brake wear sensor

[Ant]

is there an easy way to tell which one has been triggered/is throwing the warning

only put new discs/pads in it 12k ago so want to make sure they actually need changed and it's not a faulty sensor

 

[Scooba_Steve]

Think a code read will show, if not then a multimeter across will show which is broken.

 

[patriot66]

There are only two brake pad wear sensors fitted on the Zed, O/S/R and N/S/F. Just jack it up and pull a wheel off. You'll soon see what's what.

 

[buzyg]

As above. Just pop the wheels off and take a look at the pads.

 

[Ant]

aye that's what i was trying to avoid, the trolley is burried underneath "stuff" in the garden storage

tbh looks like the front from a vague inspection, rears both side look fairly chunky still

 

[kis]

Can get an idea if you know what you're looking for? Just take a look behind the alloy spokes? Possibly easier if you've got the likes of 108's to 107's.

You've got a thousand miles or so depending on your driving style... from the time of trigger...